Specification Sheet

PGS930YP/BP
GE Profile
™
30" Smart Slide-In Front-Control Gas Fingerprint Resistant
Range with No Preheat Air Fry
For answers to your Monogram, GE Café
™
,
GE Profile
™
or GE Appliances product questions,
visit our website at geappliances.com or call
GE Answer Center
®
Service, 800.626.2000.
Specification Revised 4/22
All GE ranges are equipped
with an Anti-Tip device. The
installation of this device is an
important, required step in the
installation of the range.
ADA
COMPLIANT
NOTE: Door handle protrudes 3" from door face. Cabinets and
drawers on adjacent 45° and 90° walls should be placed to avoid
interference with the handle.
NOTE: Cabinets installed adjacent to slide-in ranges must have an
adhesion spec of at least 194° temperature rating.
INSTALLATION INFORMATION: Before installing, consult installation
instructions packed with product for current dimensional data.
For all installations, install the required rear trim to back of range
with 4 screws provided.
36 1/4"
+/- 1/4"
29 7/8"
26 7/8"
w/o handle
29 1/2"
w/handle
47 1/2"
1 1/8"
30" min
See note A
Note A: 30" Minimum to bare cabinet, see
installation instructions heights less than 30"
18"
minimum
to cabinets
above counter
6" right side
6" left side
minimum
to side wall
0"
minimum
to cabinets
below
cooktop
16"
max to
cabinets
above
counter
36"
12 1/2"
5"
2"
13"
9"
4 1/2"
4"
30"
Side Wall
supply
electrical
and
Gas
14 1/2"
30"
24"
GAS PIPE AND ELECTRICAL OUTLET LOCATIONS
PGS930_JGS760
36 1/4"
+/- 1/4"
29 7/8"
26 7/8"
w/o handle
29 1/2"
w/handle
47 1/2"
1 1/8"
30" min
See note A
Note A: 30" Minimum to bare cabinet, see
installation instructions heights less than 30"
18"
minimum
to cabinets
above counter
6" right side
6" left side
minimum
to side wall
0"
minimum
to cabinets
below
cooktop
16"
max to
cabinets
above
counter
36"
12 1/2"
5"
2"
13"
9"
4 1/2"
4"
30"
Side Wall
supply
electrical
and
Gas
14 1/2"
30"
24"
GAS PIPE AND ELECTRICAL OUTLET LOCATIONS
PGS930_JGS760