Use and Care Manual

8 49-2000977 Rev. 1
USING THE COOKTOP: SelectingCooktopSettings/HowToSynchronizeLeftElements
Selecting Cooktop Settings
How To Synchronize Left Elements
Choose the element/burner that is best fit to the
cookware size. Each element/burner on your new
cooktop has its own power levels ranging from low to
high.Powerlevelsettingsnecessaryforcookingwillvary
depending on the cookware being used, the type and
quantityoffood,andthedesiredoutcome.Ingeneraluse
lower settings for melting, holding and simmering and
use higher settings for heating quickly, searing and frying.
When keeping foods warm confirm selected setting is
sufficient to maintain food temperature above 140°F.
Largerelementsandelementsmarked“KeepWarm”are
not recommended for melting.
Hi is the highest power level, designed for large quantity
rapid cooking and boiling. Hi will operate for a maximum
of 10 minutes. Hi may be repeated after the initial 10
minute cycle by pressing the + pad.
CAUTION
Donotplaceanycookware,utensilsor
leave excess water spills on control key pads. This may
result in unresponsive touch pads and turning off the
cooktop if present for several seconds.
To Turn On
Hold the Sync Burners pad for about half a second
to connect the two burners. Operate either element as
described on page 7 to adjust power level.
To Turn Off
1. Touch the On/Off pad on either burner to turn off the
SyncBurners.
or
2. Touch the Sync Burners to turn both burners off.
Hi
boiling quickly
frying
searing
reducing
simmering
holding
melting
Low