Installation Instructions

31-10986-2
5
INSTALLING THE COOKTOP
Installation Instructions
1
PROTECT SURFACE OF
COOKTOP
Place a towel or tablecloth onto the countertop.
Lay the cooktop upside down onto the protected
surface.
3
ATTACH FOAM TAPE
Apply the foam tape around the outer edge of
the glass. Do not overlap the foam tape.
Bottom of Cooktop
Cloth under Cooktop
Bottom of Cooktop
Foam Tape
Cooktop
Glass
2
INSTALL BAFFLE
Secure the baffle to the cooktop with screws.
NOTE: Do not install the baffle when the cooktop
is installed over a single oven.
Hex Head
Screws
4
LOCATE MOUNTING PARTS
Remove the hold down brackets and screws
from the literature package.
Screw the Hold Down Bracket to the side of
the cooktop unit. Repeat for opposite side of
cooktop.
Alternate Installation:
You can order an alternate installation kit
WB01X24570with wing nuts and brackets from
your dealer. See diagram for instructions.
Open the cabinet door. Install the second screw
through the bracket and tighten. Then tighten the
first screw. Install thumbscrew until it touches the
bottom of the countertop.
IMPORTANT: Turn the thumbscrew until it
touches the bottom of the countertop. Do not
overtighten.
Mounting Screw
Hold Down
Bracket
Pre-Drilled Hole
Bottom of Cooktop
Cooktop Glass
Foam Tape
Cooktop Countertop
1” = 2.5 cm; 1’ = 0.3 m