Installation Guide

31-2000021 Rev. 2 5
Installation Instructions
PREPARING THE OPENING (Cont)
INSTALLING THE COOKTOP
5
VERTICAL CLEARANCES
Allow 3” minimum vertical clearance for air space from
the cooktop bottom (or 5-7/8” minimum depth from the
countertop) to any combustible surfaces, such as the
top of a cabinet drawer.
1
INSTALLING THE JUNCTION BOX
Install an approved
junction box where it will
be easily reached through
the front of the cabinet
where the cooktop will
be located. The cooktop
conduit is 4 feet long.
WARNING
The
junction box must be
located where it will allow
considerable slack in the
conduit for serviceability.
2
PROTECT SURFACE OF COOKTOP
Place a towel or
tablecloth onto the
countertop. Lay the
cooktop upside down
onto the protected
surface.
3
INSTALL BAFFLE
Secure the baffle to the cooktop with screws.
NOTE: Do not install the baffle when the cooktop is
installed over a single oven.
6
FOR AMERICANS WITH
DISABILITIES ACT (ADA)
FORWARD APPROACH
INSTALLATION ONLY
Allow 5” minimum depth
between the countertop and an
enclosure.
NOTE: The enclosure must
be made of at least 1/4” wood
material. Also, an access panel
is required for the junction
box, hold-down brackets, and
service.
Install junction box so
that it can be reached
through the front of
the cabinet.
16”
Min.
Bottom of Cooktop
Cloth under Cooktop
Hex Head
Screws
Rear of
Cooktop
DRAWER
3"
5-7/8"
5"