Specification

Listed by
Underwriters
Laboratories
For answers to your Monogram
®
or GE appliance
questions, visit our website at geappliances.com
or call GE Answer Center
®
service, 800.626.2000.
C
L
Suitable
bracing
to support
runners
(must support 200 lbs.)
2 x 4 or
equivalent runners
level with bottom of cutout
and flush with sides of cutout
or solid bottom floor.
F
E
22
"
Conduit
40"
D
8-3/4" MAX.
Cutout depth
23-1/2" MIN
Cabinet 27"
A – Overlap of oven at top of cutout 1"
B – Overlap of oven over side of edges of cutout 1"
C – Overlap of oven at bottom of cutout 1"
Oven
D – Overall depth with handle 26-23/32"
E – Overall height with trim 30-3/16"
F – Overall width 26-23/32"
PK7000
JK5000
JK3000
JK1000
B
27''
A
C
Cutout width
25" MIN.
25-1/4" MAX.
Recommended
cutout location
from floor
32-1/2"
Cutout height
27-5/8" MIN.
28-1/8" MAX.
23" minimum
door opening
allowance
22" to
bottom of
junction box
Junction box
location
PK7000SF
Profile
™
Series 27" Built-In Single Convection Wall Oven
Dimensions and Installation Information (in inches)
Specification Created 2/13
220370
* ADA qualified based on Uniform
Federal Accessibility Standards
*
C
L
Suitable
bracing
to support
runners
(must support 200 lbs.)
2 x 4 or
equivalent runners
level with bottom of cutout
and flush with sides of cutout
or solid bottom floor.
F
E
22
"
Conduit
40"
D
8-3/4" MAX.
Cutout depth
23-1/2" MIN
Cabinet 27"
A – Overlap of oven at top of cutout 1"
B – Overlap of oven over side of edges of cutout 1"
C – Overlap of oven at bottom of cutout 1"
Oven
D – Overall depth with handle 26-23/32"
E – Overall height with trim 30-3/16"
F – Overall width 26-23/32"
PK7000
JK5000
JK3000
JK1000
B
27''
A
C
Cutout width
25" MIN.
25-1/4" MAX.
Recommended
cutout location
from floor
32-1/2"
Cutout height
27-5/8" MIN.
28-1/8" MAX.
23" minimum
door opening
allowance
22" to
bottom of
junction box
Junction box
location
Note: These ovens are not approved for stackable
or side-by-side installations.
Note: Cabinets installed adjacent to wall ovens
must have an adhesion spec of at least a 194°F
temperature rating. For 27” built-in single ovens, if
marks, blemishes or the cutout opening is visible
above the installed oven, it may be necessary to
add wood shims under the runners and front trim
until the marks or openings are covered.
Note: Door handle protrudes 3" from door face.
Cabinets and drawers on adjacent 45° and 90°
walls should be placed to avoid interference with
the handle.
Electric wall ovens are not approved for
installation with a plug and receptacle. They
must be hard wired in accordance with
installation instructions.
Installation Information: Before installing, consult
installation instructions packed with product for
current dimensional data.
KW Rating
240V
3.6
208V
2.7
Breaker Size
240V
20 Amps
208V
20 Amps
C
L
Suitable
bracing
to support
runners
(must support 200 lbs.)
2 x 4 or
equivalent runners
level with bottom of cutout
and flush with sides of cutout
or solid bottom floor.
F
E
22
"
Conduit
40"
D
8-3/4" MAX.
Cutout depth
23-1/2" MIN
Cabinet 27"
A – Overlap of oven at top of cutout 1"
B – Overlap of oven over side of edges of cutout 1"
C – Overlap of oven at bottom of cutout 1"
Oven
D – Overall depth with handle 26-23/32"
E – Overall height with trim 30-3/16"
F – Overall width 26-23/32"
PK7000
JK5000
JK3000
JK1000
B
27''
A
C
Cutout width
25" MIN.
25-1/4" MAX.
Recommended
cutout location
from floor
32-1/2"
Cutout height
27-5/8" MIN.
28-1/8" MAX.
23" minimum
door opening
allowance
22" to
bottom of
junction box
Junction box
location
C
L
Suitable
bracing
to support
runners
(must support 200 lbs.)
2 x 4 or
equivalent runners
level with bottom of cutout
and flush with sides of cutout
or solid bottom floor.
F
E
22
"
Conduit
40"
D
8-3/4" MAX.
Cutout depth
23-1/2" MIN
Cabinet 27"
A – Overlap of oven at top of cutout 1"
B – Overlap of oven over side of edges of cutout 1"
C – Overlap of oven at bottom of cutout 1"
Oven
D – Overall depth with handle 26-23/32"
E – Overall height with trim 30-3/16"
F – Overall width 26-23/32"
PK7000
JK5000
JK3000
JK1000
B
27''
A
C
Cutout width
25" MIN.
25-1/4" MAX.
Recommended
cutout location
from floor
32-1/2"
Cutout height
27-5/8" MIN.
28-1/8" MAX.
23" minimum
door opening
allowance
22" to
bottom of
junction box
Junction box
location
PK7000