Use and Care Manual

12 49-2000975 Rev. 1
Tri-Ring Surface Element
■ Tousethelargesurfaceelement,pushandturnthe
center control knob clockwise to , stopping at the
desired setting. This will activate the entire heating area.
■ Tousethemediumsurfaceelement,pushandturn
the center control knob clockwise to , stopping at
the desired setting. This will activate the medium-size
heating area.
■ Tousethesmallestsurfaceelement,pushandturn
the center control knob clockwise to , stopping at the
desired setting. This will activate the smallest, inside
heating area.
Element Cycling
Turn Product On/Off
Operating The Cooking Elements
USING THE COOKTOP:ElementCycling/TurnProductOn/Off/OperatingTheCookingElements
Surface elements will cycle on and off to maintain the
temperature you have selected. All radiant surface elements
have a temperature limiter that protects the glass cooktop
from getting too hot, this is normal. The temperature limiter
may cycle the elements off more frequently if:
■ Thepanboilsdry.
■ Thepanbottomisnotflat.
■ Thepanisoff-center.
■ Thereisnopanontheelement.
■ Pushtheknobdownandturnineitherdirectiontothe
setting you want. When the control is in any position
other than Off, it may be rotated without pushing it
down. You may feel a slight bump when it is rotated
through the Lo or Hi positions. You may hear slight
clicking sounds during cooking, indicating the control
is keeping the power level you set.
■ AHOT SURFACE indicator light will glow when any
radiant element is turned on and will remain on until
the surface is cooled to approximately 150°F.
■ BesureyouturnthecontrolknobtoOff when you
finish cooking. It will snap into the Off position.
Dual Surface Element
■ Tousethesmallsurfaceelement,turnthecontrol
knob to the Small Burner settings.
■ Tousethelargesurfaceelement,turnthecontrol
knob to the Large Burner settings.