Use and Care Manual

8 49-2000974 Rev. 1
Element Cycling
USING THE COOKTOP:ElementCycling/OperatingTheCookingElements/AdjustBurnerSize
Surface elements will cycle on and off to maintain the
temperature you have selected. All radiant surface elements
have a temperature limiter that protects the glass cooktop
from getting too hot, this is normal. The temperature limiter
may cycle the elements off more frequently if:
■ Thepanboilsdry.
■ Thepanbottomisnotflat.
■ Thepanisoff-center.
■ Thereisnopanontheelement.
Operating The Cooking Elements
Adjust Burner Size
TurnBurner(s)On:TouchandholdOn/Off pad about
half a second. A chime can be heard with each touch to
any pad.
Powerlevelcanbeselectedinanyofthefollowingways:
1. Swipe the gray arc(onthegraphics)tothedesired
power level. There is no sensor on the LEDs, or;
2. Touch Anywhere along the gray arc, or;
3. Touch + or - pads to adjust power level, or;
4. Shortcut to Hi: Immediately after turning unit on, touch
the + pad, or;
5. ShortcuttoLow:Immediatelyafterturninguniton,
touch the - pad.
The burner ring size is adjustable on some elements.
The ring size can be selected by pressing the burner
ring graphic.
Gray Arc
Swipe Area
LED
Lights
Gray Arc Swipe Area
Single Surface
Element
DualSurface
Element
Tri-Ring Surface
Element