Specification
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
PP9830DR
GE Profile
™
Series 30" Downdraft Electric Cooktop
Specification Revised 8/22
Listed by
Underwriters
Laboratories
For answers to your Monogram, GE Café
™
Series, GE Profile
™
Series or
GE Appliances product questions, visit our website at geappliances.com
or call GE Answer Center
®
Service, 800.626.2000.
WALL INSTALLATION: Wall installations require
25" countertop depth. When cabinet is flush against
the wall, the fan housing can be rotated to the
horizontal position for direct venting through rear
wall. Make a countertop cutout in the range cabinet
according to unit dimensions and installation type.
Duct hole is positioned in back of cabinet for
through-the-wall ducting.
PENINSULA OR ISLAND INSTALLATION: For
peninsula/islands a minimum 26" countertop depth is
suggested. Blower should be in vertical position. Island
or peninsula cabinets may require adjustment in cutout
depth and/or location within the width dimensions.
Duct hole is positioned in bottom of cabinet for island
or peninsula installation.
SLAB INSTALLATION: For peninsula or island
installation and rear wall ducting, 6" PVC duct or
locally approved piping should be used if installing
under a poured concrete slab.
RECEPTACLE LOCATION: Install an approved
junction box within shaded area shown in diagram.
Junction box must be at least 10-1/2" below top
of cabinet.
INSTALLATION INFORMATION: Before installing,
consult installation instructions, packed with product,
for current dimensional data.
NOTE: Electrical cable is not supplied with unit.
Order part number JXCK89 from your Ge Appliances
Dealer
These cooktops are approved for indoor use only.
*Note: A 6" minimum spacing to adjacent side wall is required
Dimension and installation information are shown in inches.
KW RATING
240V 9.1
208V 6.9
APPROXIMATE COOKING DIMENSIONS