Specification

ManualsBrandsGE Profile ManualsAppliances30 in. Built-In Electric Convection Wall Oven Self-Cleaning with Built-In Microwave in Black

DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)

PT7800DH

GE Profile

™

Series 30" Built-In Combination Convection Microwave/Convection Wall Oven

For answers to your Monogram, GE Café

™

Series, GE Profile

™

Series or

GE Appliances product questions, visit our website at geappliances.com

or call GE Answer Center

Service, 800.626.2000.

Specification Revised 3/16

NOTE: Cabinets installed adjacent to

wall ovens must have an adhesion spec

of at least a 194°F temperature rating.

INSTALL ATION INFORMATION:

Before installing, consult installation

instructions packed with product for

current dimensional data.

Door handle protrudes 3" from door

face. Cabinets and drawers on adjacent

45° and 90° walls should be placed to

avoid interference with the handle.

Electric wall ovens are not approved for

installation with a plug and receptacle.

They must be hard wired in accordance

with installation instructions.

NOTE: These ovens are not

approved for stackable or

side-by-side installations.

Suitable

bracing

to support

runners

2 x 4 or

equivalent runners

level with bottom of cutout

and flush with sides of cutout

or solid bottom floor.

30 ''

CUTOUT WIDTH

28-1/2" MIN.

28-5/8" MAX.

Recommended

minimum

cutout location

from the floor

21-5/8"

21"

CUTOUT HEIGHT

42-3/16" MIN.

42-1/4" MAX.

(must support 275 lbs.)

20" MIN.

door opening

allowance

CONDUIT

48"

CABINET 30"

A –Overlap of oven at top of cutout 1"

B – Overlap of oven over side of edges of cutout 3/4"

C –Overlap of oven at bottom of cutout 1"

OVEN

D –Install depth 23-1/2"

E –Overall height with trim 42-3/8"

F –Overall width 29-3/4"

JK3800

PK7800

ATTENTION INSTALLER: All electric wall ovens must be hard-wired (direct-wired)

into an approved junction box. A plug and receptacle is NOT permitted on these products.

NOTE: If the cabinet does not have a solid bottom,

two braces or runners must be installed to support

the weight of the oven. For single ovens, the runners

and braces must support 200 lbs (91 kg). For double

ovens, the runners and braces must support 375 lbs.

(170 kg).

NOTE: If marks, blemishes or the cutout opening are

visible above the installed oven, it may be necessary

to add wood shims under the runners and front trim

until the marks or opening are covered.

NOTE: If the cabinet does not have a front frame

and the sides are less than 3/4" (1.9 cm) thick, shim

both sides equally to establish the cutout width.

9-1/2" MAX.

RIGHT SIDE ONLY

CUTOUT DEPTH

23-1/2" MIN.

28" MIN. to

bottom of

junction box

Junction box

location

(Junction box

may be located

in adjacent

cabinet)

PT7800

KW R ATING

240V 6.8

208V 5.1

BREAKER SIZE

240V 30 Amps

208V 30 Amps

Dimension and

installation information

are shown in inches.

Listed by

Underwriters

Laboratories