Installation Guide
2 C
CUTOUT FOR DOUBLE OVENS (2 THERMAL OVENS)
NOTE: If the cabinet does not have a front frame and the sides are less than ¾” (1.9 cm) thick,
shim both sides equally to establish the cutout width.
Dim. Description
30” Double Oven with
Pedestal
30” Double Oven
without Pedestal
A Cabinet Width 30” (76.2 cm) 30” (76.2 cm)
B Cutout Width 28
1
»2” (72.4 cm) min.
28
5
»8” (72.7 cm) max.
28
1
»2” (72.4 cm) min.
28
5
»8” (72.7 cm) max.
C Cutout Height 51
13
»16” (131.6 cm) min.
51
15
»16” (131.9 cm) max.
50 ¼” (127.64cm)
D Clearance from cutout - side edges*
11
»16” (1.75 cm)
11
»16” (1.75 cm)
E Clearance to Adjacent Corners, Drawers,
Walls, etc., When Door Is Open
31
1
»8” (77.8 cm) min. 31
1
»8” (77.8 cm) min.
F Clearance from cutout - top* 1” (2.5 cm) min.
(1
1
»4” (3.2 cm) for PT9550,
ZET2S and ZET2P)
1” (2.5 cm) min.
(1
1
»4” (3.2 cm) for PT9550,
ZET2S and ZET2P)
G Clearance from cutout - bottom* 1
1
»4” (3.2 cm) 1
1
»4” (3.2 cm)
H Junction Box Location 9
1
»2” (24.1 cm) max. right
side only
9
1
»2” (24.1 cm) max. right
side only
K Recommended Cutout Location from Floor 12” (30.5 cm) 12” (30.5 cm)
L Door swing depth - Allow additional
clearances for installation and oven usage
31
1
»8” (77.8 cm) min. 31
1
»8” (77.8 cm) min.
M Countertop or cabinet door protrusion
(measure if exist)
Measure “M” Measure “M”
N Gap between edge of countertop
or cabinet door to cabinet opening
If M = 0, N = 0, Otherwise
N = M + 1” (2.54 cm) min.
If M = 0, N = 0, Otherwise
N = M + 1” (2.54 cm) min.
P Junction Box location 5-1/4” (13.34 cm) max. 5-1/4” (13.34 cm) max.
R Junction Box location 2-1/2” (6.35 cm) max. 2-1/2” (6.35 cm) max.
S Door swing width - Allow additional
clearances for installation and oven usage
24” (61 cm) min. 24” (61 cm) min.
Continue to Section 3.
31-2000252 Rev. 2 11-21 GEA
* Refers to minimum clearance required for wall oven installation and does not reflect actual product dimensions.
B
C
K
F
G
A
M
L
N
LH door swing shown.
RH door swings opposite.
D
H
R
P
E
Junction Box
Location
(junction box
may be located
in adjacent
cabinet)
Cutout Depth
23-1/2”
(59.7 cm) Min.
NOTE: Allow
1/4” (0.64 cm)
clearances from
side edges of
oven door.
S