Owner's & Installation Guide

14 49-2000768 Rev. 1
Installation Instructions
INSTALLING CABINET SUPPORT
IMPORTANT: When installed below a single or double
oven, check to be sure that any oven supports above
the cutout do not obstruct the 23
1
/2” required depth of
the warming drawer cutout.
Ŷ A 2" minimum clearance between oven and
warming drawer cutouts are required. Additional
clearance may be required if 2 x 4 blocks are used
to support runners or solid floor of the oven above.
Ŷ 7KHZDUPLQJGUDZHUPD\EHVXSSRUWHGE\HLWKHUD
solid bottom, 2 x 4 or 2 x 2 runners.
Ŷ 7KHVXSSRUWPXVWEHOHYHODQGULJLGO\PRXQWHG
flush with the bottom edge of the cutout.
There is no way to level the drawer once it has
been installed. Be sure supports are level.
Ŷ 7KHHQWLUHZHLJKWRIWKHGUDZHULVVXSSRUWHGE\
the runners or solid floor and must be capable of
supporting 150 lbs.
INSTALLATION INSTRUCTIONS
2" x 4" or equivalent runners
23
1
/2”23
1
/2”
2" x 4" or equivalent runners
22" 25"
27" 30"