Specification

Listed by
Underwriters
Laboratories
For answers to your Monogram
®
or GE
®
appliance
questions, visit our website at geappliances.com
or call GE Answer Center
®
service, 800.626.2000.
24" Min
36" Max
18-1/2"
10-3/16"
11-3/4"
36"
*Height
to
Ceiling
1-3/4"
PVW7361SJ_EJ
The vent hood must be installed 24" min. and 36" max. above the cooking surface.
The hood installation height above the cooking surface depends upon ceiling height. The telescopic
duct cover conceals the ductwork running from the top of the hood to the ceiling.
NOTE: Installation height should be measured from the cooking surface to the lowest part
of the hood. This hood may be installed onto a wall and vented to the outdoors, or it can be installed
for recirculating operation. Parts for recirculating operation are supplied with the hood. However, when
installed for recirculating operation, the optional charcoal Filter JXCF71 will need to be purchased separately.
36" Models Require a 36"-Wide Opening
*The supplied duct cover fits 7'-5" to 9'-3" ceiling heights
(10' with optional high ceiling kit JXDC71)
24" Min
36" Max
18-1/2"
10-3/16"
11-3/4"
36"
*Height
to
Ceiling
1-3/4"
PVW7361SJ_EJ
The vent hood must be installed 24" min. and 36" max. above the cooking surface.
The hood installation height above the cooking surface depends upon ceiling height. The telescopic
duct cover conceals the ductwork running from the top of the hood to the ceiling.
NOTE: Installation height should be measured from the cooking surface to the lowest part
of the hood. This hood may be installed onto a wall and vented to the outdoors, or it can be installed
for recirculating operation. Parts for recirculating operation are supplied with the hood. However, when
installed for recirculating operation, the optional charcoal Filter JXCF71 will need to be purchased separately.
36" Models Require a 36"-Wide Opening
*The supplied duct cover fits 7'-5" to 9'-3" ceiling heights
(10' with optional high ceiling kit JXDC71)
Installation Information:
Before installing, consult Use & Care/installation instructions
packed with product for current dimensional data.
Optional Accessories
JXDC71SS/ES-Chimney Height Kit
Max ceiling height installation with kit - 10'-0"
JXRC70-Remote Control
JXCF71-Charcoal Filter
(needed if used in recirculation mode)
Amp Rating
120V
3.5
PVW7361SJ/EJ
GE Profile
Series 36" Wall-Mount Glass Canopy Chimney Hood
Dimensions and Installation Information (in inches)
Specification Created 1/15
36" Models Require a 36"-Wide Opening
*The supplied duct cover fits 7'-5" to 9'-3" ceiling
heights (10" with optional high ceiling kit JXDC71)
The vent hood must be installed 24" min. and 36" max. above the cooking surface.
The hood installation height above the cooking surface depends upon ceiling height.
The telescopic duct cover conceals the ductwork running from the top of the hood to
the ceiling.
NOTE: Installation height should be measured from the cooking surface to the lowest
part of the hood. This hood may be installed onto a wall and vented to the outdoors,
or it can be installed for recirculating operation. Parts for recirculating operation
are supplied with the hood. However, when installed for recirculating operation, the
optional charcoal filter JXCF71 will need to be purchased separately.

Summary of content (2 pages)