Manualshelf

Quick Specs

ManualsBrandsGE Profile ManualsOtherUVB30DKBB
123
UVB30DK
Universal 30" Telescopic Downdraft System
For answers to your Monogram, GE Café
™
Series, GE Profile
™
Series or
GE Appliances product questions, visit our website at geappliances.com
or call GE Answer Center
®
Service, 800.626.2000.
Specification Revised 8/16
UVB30SK_DK
2-1/8"*
8-1/2"
30"
PRODUCT DIMENSIONS
23-5/8"
2"
1-1/2"
28-5/16"
30"
2-1/4"
9-1/2"
8-1/2"
Lift
32-3/8"
Locate the Gas or Electrical *Minimum distance required between
the back edge of the cooktop
and the back of the cutout
in the countertop
Connection Only Within the
Shaded Area
DO NOT Locate
Gas or Electrical
Connections within
this Area
29-1/2"
12"
Electrical
Outlet 12"
Above
Cabinet
Floor
30" Models 30" 28-5/16"
A B
UVB30SK_DK
2-1/8"*
8-1/2"
30"
PRODUCT DIMENSIONS
23-5/8"
2"
1-1/2"
28-5/16"
30"
2-1/4"
9-1/2"
8-1/2"
Lift
32-3/8"
Locate the Gas or Electrical *Minimum distance required between
the back edge of the cooktop
and the back of the cutout
in the countertop
Connection Only Within the
Shaded Area
DO NOT Locate
Gas or Electrical
Connections within
this Area
29-1/2"
12"
Electrical
Outlet 12"
Above
Cabinet
Floor
30" Models 30" 28-5/16"
A B
UVB30SK_DK
2-1/8"*
8-1/2"
30"
PRODUCT DIMENSIONS
23-5/8"
2"
1-1/2"
28-5/16"
30"
2-1/4"
9-1/2"
8-1/2"
Lift
32-3/8"
Locate the Gas or Electrical *Minimum distance required between
the back edge of the cooktop
and the back of the cutout
in the countertop
Connection Only Within the
Shaded Area
DO NOT Locate
Gas or Electrical
Connections within
this Area
29-1/2"
12"
Electrical
Outlet 12"
Above
Cabinet
Floor
30" Models 30" 28-5/16"
A B
UVB30SK_DK
2-1/8"*
8-1/2"
30"
PRODUCT DIMENSIONS
23-5/8"
2"
1-1/2"
28-5/16"
30"
2-1/4"
9-1/2"
8-1/2"
Lift
32-3/8"
Locate the Gas or Electrical
*Minimum distance required between
the back edge of the cooktop
and the back of the cutout
in the countertop
Connection Only Within the
Shaded Area
DO NOT Locate
Gas or Electrical
Connections within
this Area
29-1/2"
12"
Electrical
Outlet 12"
Above
Cabinet
Floor
30" Models 30" 28-5/16"
A B
UVB30SK_DK
2-1/8"*
8-1/2"
30"
PRODUCT DIMENSIONS
23-5/8"
2"
1-1/2"
28-5/16"
30"
2-1/4"
9-1/2"
8-1/2"
Lift
32-3/8"
Locate the Gas or Electrical *Minimum distance required between
the back edge of the cooktop
and the back of the cutout
in the countertop
Connection Only Within the
Shaded Area
DO NOT Locate
Gas or Electrical
Connections within
this Area
29-1/2"
12"
Electrical
Outlet 12"
Above
Cabinet
Floor
30" Models 30" 28-5/16"
A B
NOTE: Telescopic downdraft vents are not
recommended to be installed with cooktops
that are flush mounted.
Approved for use with the following Monogram,
GE Profile
™
Series
and GE
®
Series cooktops–30"
electric models, 30" gas sealed-burner models
and 30" induction models.
NOT APPROVED FOR USE WITH STANDARD
BURNER GAS COOKTOPS.
NOTE: The countertop must be at least 26" deep with
a flat surface area of 23-1/2" or more, front to back.
In addition, other clearances to the front edge of the
countertop must be considered.
NOTE: Dimensions shown are for reference only.
Before cutting out countertop, refer to instructions
packed with downdraft and cooktop.
NOTE: Installation on cabinets/countertops against
the wall will not be possible in most applications.
Against the wall installations are limited to
dimension requirements. Refer to installation
instructions packed with product for further details.
JXRB67 INDOOR REMOTE ACCESSORY.
Optional accessory may be ordered for installation
of motor and blower assembly in an indoor remote
location.
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)

Summary of content (3 pages)