Installation Instructions

• Press ¾ to delete the number at the cursor position.
• Press #¾ to delete all the numbers from the number at the cursor position to the end
of the string.
4. Do one of the following:
• Press the keys 0 to 9 to insert new numbers.
• Press #0 to insert G (to use the GSM instead of the PSTN).
• Press #1 to insert a star.
• Press #2 to insert #.
• Press #3 to insert a four-second delay.
• Press #4 to insert P (this enables pulse dialing).
5. Press OK to accept the changes.
• If the new number is valid, the keypad beeps once to confirm the change and returns
to the menu option.
• If the new number is invalid, the keypad beeps three times to reject the change and
returns to the menu option.
6. Press NO to cancel the changes and return to the menu option.
Exiting the menu system
1. Press NO repeatedly until OK to Exit prompt displays.
Note: If you are not in a value selection mode nor in a value edit mode, you can press ## to display the OK to Exit
prompt. It also means you can exit any menu level immediately by pressing [NO] [#] [#].
2. Press OK at this prompt to exit the menu system.
Editing text
Overview
The NX-10 has a text editor that includes a word library. You can use this editor to change the text of
certain programmable text options.
F1 F2 F3 F4 F5 F6 F7 F8
1. Navigate with the ½¾ keys to the relevant menu option and press OK.
2. Press OK to select the language you want to edit.