Product Guide

PRELIMINARY
16 17
6500 SERIES | HEAT PUMP UNITS
*
230/208V MODELS AZ65H07D AZ65H09D AZ65H12D AZ65H15D
Cooling BTUh 7,100/6,900 9,700/9,600 12,100/11,900 14,400/14,200
EER (BTUh/Watt) 12.8/12.8 12.2/12.2 11.9/11.9 10.6/10.6
Dehumidification Pts/Hr 1.7 2.7 3.5 4.5
Refrigerant type R-410A R-410A R-410A R-410A
CFM, indoor fan high 340 360 370 370
CFM, indoor fan low 194 212 284 290
Power factor 91% 92% 92% 91%/92%
Cooling watts 545/535 795/785 1,015/1,000 1,355/1,335
Cooling amperes, F.L. 2.5/2.7 3.6/3.8 4.5/4.9 6.1/6.5
Amperes, L.R. 13.5 21.0 29.5 31.5
Reverse cycle heat BTU 6,200/6,100 8,100/8,000 10,500/10,400 13,400/13,300
COP 3.9/3.9 3.7/3.7 3.6/3.6 3.3/3.3
Heating watts 4 65/455 650/635 855/835 1,190/1,180
Heating amperes 2.2/2.3 3.1/3.3 4.1/4.5 5.2/5.6
Weight (Net/Ship) 94/107 101/114 102/115 101/114
265V MODELS AZ65H07E AZ65H09E AZ65H12E AZ65H15E
Cooling BTUh 7,000 9,400 11,700 14,400
EER (BTUh/Watt) 12.8 12.2 11.6 10.6
Dehumidification Pts/Hr 1.7 2.7 3.5 4.5
Refrigerant type R-410A R-410A R-410A R-410A
CFM, indoor fan high 340 360 370 370
CFM, indoor fan low 194 211 284 290
Vent CFM
(full open/partial open)
50/40 70/45 75/45 75/45
Power factor 92% 90% 92% 93%
Sensible heat ratio
@ 265 volts
85% 75% 70% 65%
Cooling watts 540 760 1,015 1,355
Cooling amperes, F.L. 2.2 3.1 4.0 5.4
Amperes, L.R. 11.7 16.5 23.5 26.0
Reverse cycle heat BTU 6,200 8,100 10,700 13,500
COP 3.9 3.6 3.6 3.3
Heating watts 455 665 880 1,270
Heating amperes 2.0 2.7 3.6 5.0
Weight (Net/Ship)
**
97/117 106/119 107/120 106/119
*Premium Guard Corrossion Protection model BTUh and watts may vary.
**ICR adds 3 pounds to unit weight.
Specifications subject to change.
HEAT PUMP
6500 SERIES
HEAT PUMP UNITS*
• Staged heating
• Heat pump with resistance heat backup
• Electric resistance heat lockout
• Reverse cycle defrost
• Models with Premium Guard Corrosion
Protection and ICR are also available
**
ZONELINE® CHASSIS NOMENCLATURE
AZ65H12DAD
Chassis series
45=cool/electric heat
65= heat pump
Unit type
E= cooling with electric
resistance heat
H= heat pump with electric
resistance heat
Nominal cooling capacity
07=7,000 BTUh cooling
09=9,000 BTUh cooling
12=12,000 BTUh cooling
15=15,000 BTUh cooling
Special features
B=base unit
C= corrosion treated
D= internal condensate
removal (ICR)
system (heat pump
models only—
not for coastal
applications)
M=Makeup Air
P=Dry Air 25
Voltage/Phase/Frequency
D= 230/208 Volt, single
phase, 60 Hz
E= 265 Volt, single phase,
60 Hz
Universal
power connection
GE APPLIANCES
ZONELINE® WARRANTY
FOR THE PERIOD OF
ONE YEAR
From the date of the
original purchase
FIVE YEARS
From the date of the
original purchase
SECOND THROUGH
FIFTH YEAR
From the date of the
original purchase
GE APPLIANCES WILL REPLACE
Any part of the air conditioner which fails due to a defect in materials or workmanship. During this
limited one-year warranty, GE will provide, free of charge, all labor and related service costs to
replace the defective part.
Sealed Refrigerating System, if any part of the Sealed Refrigerating System (the compressor,
condenser, evaporator, and all connecting tubing) should fail due to a defect in materials or
workmanship. During this limited five-year warranty, GE will provide, free of charge, all labor
and related service costs to replace the defective part.
Fan Motors, Switches, Thermostat, Heater, Heater Protectors, Compressor Overload, Solenoids,
Circuit Boards, Auxiliary Controls, Thermistors, Freeze Sentinel, Frost Controls, ICR Pump,
Capacitors, Varistors and Indoor Blower Bearing, if any of these parts should fail due to a defect in
materials or workmanship. During this additional four-year limited warranty, the customer will be
responsible for any labor and related service costs.