Specifications

AZ65H12EAC
GE Zoneline
®
Heat Pump Unit with Corrosion Protection, 265 Volt
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
Specification Revised 1/16
For answers to your Monogram, GE Café
™
Series, GE Profile
™
Series or
GE Appliances product questions, visit our website at geappliances.com
or call GE Answer Center
®
Service, 800.626.2000.
ELECTRICAL WIRING
All wiring, including installation of receptacle, must be made in accordance
with local electrical codes and regulations.
NOTE: Aluminum wiring may pose special problems – consult a qualified
electrician.
GRILLE OPTIONS
Stamped Aluminum Grille – RAG60
Exterior Architectural Louvers Durable Polycarbonate:
RAG61 (Beige) RAG63 (Bittersweet)
RAG62 (Maple) RAG67 (Extruded Aluminum)
RETROFIT KITS:
RAK40 – Deflector Kit to adapt chassis for use with existing
exterior architectural louvered grilles.
DUCTED APPLICATIONS
4500 and 6500 series can be used with ductwork to heat or cool more than one
room. RAK6053 Duct Adaptor is applied to top of case over air discharge/
RAK601B Duct Extension is applied to right or left of adaptor. Locally
fabricated ductwork may be added to extend to maximum recommended
distance of 15 feet.
ELECTRICAL CONNECTION
230/208 volt units may be plugged into a receptacle. 265 volt units are provided
with a junction box and require direct connection. (NEC Requires 265V Direct
Connection) See Architects and Engineers Design Data Manual for electrical
connection information including use of sub-base for direct connected units.
Installation must comply with local electrical codes and regulations.
POWER CONNECTION KITS REQUIRED ON ALL ZONELINE CHASSIS.
265 VOLT SUB-BASE CONNECTED UNITS
SUB-BASE
POWER
CONNECTION
KIT
ELECTRIC
HEATER
WATTS
ELECTRIC
HEAT AMPS
MIN. CIRCUIT
PROTECTION
(AMPS)
RAK204E15 RAK515D 2,460 9.1 15
RAK204E20 RAK520D 3,470 12.8 20
RAK204E30 RAK530D 4,870 18.1 30
RAB71B WALL SLEEVE
Heavy-gauge galvanized steel, with insulation.
A – 42", B – 13-3/4", C – 16"
RAB77B WALL SLEEVE
Molded SMC fiberglass-reinforced polyester compound.
A – 42-1/8", B– 13-7/8", C – 16-1/4"
WALL OPENING DIMENSIONS
Add 1/4" to A and C dimensions for all cut-out size.
RAB71B 16-1/4" Min. H x 42-1/4" Min. W
Available in 16", 24", 28" and 31" depths
RAB77B 16-1/2" Min. H x 42-3/8" Min. W
MAXIMUM CORD EXTENSION
SIDE
VIEW
Inside
Room
Cabinet
Outside
58
21
Grille
7-1/8
RAB71A = 16
RAB77A = 16-1/4
RAB71A = 20-7/8
RAB77A = 21
Room Air/Installation QSart
A
C
B
Zoneline RAC Wall Installation
WALL CASE DIMENSIONS