IMPORTANT SAFETY INFORMATION
READ ALL INSTRUCTIONS BEFORE USING
For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock,
or to prevent property damage, personal injury, or loss of life.
■ This Zoneline must be properly installed in
accordance with the Installation Instructions before it
is used. See the Installation Instructions in the back
of this manual.
■ Immediately replace all electric service cords that
have become frayed or otherwise damaged. A
damaged power supply cord must be replaced with a
new power supply cord obtained from the
manufacturer and not repaired. Do not use a cord
that shows cracks or abrasion damage along its
length or at either the plug or connector end.
■ Unplug or disconnect the Zoneline at the fuse box or
circuit breaker before making any repairs.
NOTE: We strongly recommend that any servicing be
performed by a qualified individual.
■ These R410A air conditioning systems require
contractors and technicians to use tools, equipment
and safety standards approved for use with this
refrigerant. DO NOT use equipment certified for R22
Replacing an existing unit?
For details, see the Installation Instructions in this
READ AND FOLLOW THIS SAFETY INFORMATION CAREFULLY.
SAVE THESE INSTRUCTIONS
This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety
messages will follow the safety alert symbol and the word “DANGER”, “WARNING”, or “CAUTION”. These words are defined as:
Indicates a hazardous situation which, if not avoided, will result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.