User Manual

POWER SAVING DIGITAL STRIP TIMER
8 Outlet Power Strip With Digital Timer - 7 day Programmable
Function with 4 Outlets Based On Timer
and 4 Outlets Based On Switch Function
RATINGS
120V/15A/1800W 60Hz
TIMER OPERATING INSTRUCTIONS
INSTALLING BATTERY
1. TIME START UP To actuate the battery (one LR44 battery is provided with the
timer), pull the tab sticking out of the battery door.
2. All of the display shows for three seconds, then the
display reads:
OFF MO 12:00 AM
3. The clock starts.
SETTING THE CURRENT TIME
While holding the CLK (CLOCK) button down, press the DAY, HR (HOUR) and MIN
(MINUTE) buttons to set the day of the week, hour and minutes respectively.
PROGRAMMING EVENTS
1. Press the PROG button once. The display reads
 •1ONMOTUWETHFRSASU--:--,ifithasnot   
been set.
 •1ONandprevioussetting,ifithasalreadyset.
The number 1 indicates that you are now programming timer #1.
2. Press the DAY button repeatedly. The display shows the
day on which you want the timer to turn ON.
The day options include:
 •Alldaysoftheweek(MOTUWETHFRSASU)
 •Anysingledayoftheweek(MOTUWETHFRSASU)
 •Weekdaysonly(MOTUWETHFR)
 •Weekendsonly(SASU)
3. Press the HR (HOUR) and MIN (MINUTE) buttons to select
the time of day when you want the timer to turn ON.
4. Press the PROG button once again. The display reads
 •1OFFMOTUWETHFRSASU--:--,ifithasnot   
been set.
 •1OFFandprevioussetting,Ifithasalreadyset.
5. Repeat the procedure in steps 2 and 3 to select the day
and time when you want the timer to turn OFF.
6. Repeat the procedures in steps 1 to 5 to select the time and day when you
want the timer to turn ON and OFF for the other six events.
7. When programming is complete, press the CLK (CLOCK) button to return to
the current time display.
REVIEWING YOUR PROGRAMS
1. Press the PROG button repeatedly to check the ON and OFF setting for
each event.
2. While holding the MODE button down, press the PROG button to clear the
setting. Push clock button to return to main.
ACTIVATING YOUR PROGRAMS
1. Press the MODE button until the AUTO indicator is displayed. The timer will
operate automatically as programmed.
2. Press the MODE button until the RDM (RANDOM) indicator is displayed. The
timer will operate randomly as programmed.
MANUAL OVERRIDE
1. Press the MODE button until the ON indicator is displayed. The output of
the timer will turn and remain on until the mode is changed again.
2. Press the MODE button until the OFF indicator is displayed. The output of
the timer will turn off and remain off until the mode is changed again.
OPERATING THE TIMER
1. Plug the power strip into an outlet.
2. Plug the appliance to be connected into one of the receptacles on the
power strip.
3. Check the settings of the timer are correct.
4. Turn the switch on.
ThisclassBdigitalapparatuscomplieswithCanadianICES-003.
Made in China 07/09