Owner's manual

Cleaning of filters

Pre-motor filter

1. Remove the flexible hose from the canister, open the front cover and take out

the dust bag holder.

2. Take out the pre-motor filter.

3. Clean the filter by

rinsing with tap

water. Thoroughly

dry and install it

again.

Note: make sure filter is completely dry before re-installation.

Exhaust filter

1. Lift off the grill located on the back of

the vacuum

2. Take out the HEPA filter and clean with

Round Brush (part E in Accessory Kit).

Re-install it.

Warning:

please unplug the unit before

beginning any cleaning or maintenance

Note: make sure that all filters and/or dust bag are in position before operation