COFFEE MAKER with BUILT-IN GRINDER Model number: 169122 UPC: 681131691222 Customer Assistance 1-877-207-0923 (US) 1-877-556-0973 (Canada) Thank you for purchasing a GE small appliance. In keeping with the GE ecomagination initiative, please consider the option to recycle the packaging material and donate the appliance you are no longer using. To read about GE’s ecomagination commitment, visit http://ge.ecomagination.
Important Safeguards When using electrical appliances, basic safety precautions should always be followed, including the following: • Read all instructions before using. • Do not set a hot container on a hot or cold surface. • Do not touch hot surfaces. Use handles or knobs. • Do not use a cracked container or a container having a loose or weakened handle. • To protect against fire, electric shock and injury to persons do not immerse cord, plug, or in water or other liquid.
Consumer Safety Information This appliance is intended for household use only. A short power-supply is provided to reduce risks resulting from becoming entangled in or tripping over a longer cord. Longer extension cords are available and may be used if care is exercised in their use. If a long extension cord is used, the marked electrical rating of the extension cord should be at least as great as the electrical rating of the appliance.
Control panel Run indicator Program indicator Grind off indicator 1-4 cup indicator LED display The top indicator will light for PM. The bottom indicator will light for programmed time. If the bottom indicator is not lit, the display reads current time. Features • Removable filter, filter cover, and permanent filter • Non-stick warming plate to keep your coffee hot after brewing • Anti-drip function • Removable inner cover and grinder box.
OPERATING INSTRUCTIONS Before first use, it is recommended that you run the coffee maker at least 2 times to remove any tiny particles. Fill the water tank to the maximum level mark with fresh water. Insert permanent filter into the filter compartment. Run coffee maker until cycle is complete and dispose of water. Clean all detachable parts completely. Set the clock 1.
Make Coffee with Whole Beans 1. Add beans: Open the tank cover by pushing the release button and lifting up. Remove inner lid, unscrew the grinder box lid and remove grinder box. Fill the grinder box with the desired quantity of beans according to the marks on the inside of grinder box (see fig.1). Do not fill the grinder box with more than 60g/2 oz. of beans. The three marks indicate coffee bean quantity which making corresponging coffee. Fig.1 Fig.
Fig.4 Proportions exaggerated for clarity 4. Pull out the filter compartment and remove lid. Place the permanent filter in the compartment and replace the inner cover. Then push the filter compartment in place. Note: The permanent filter may allow some ground coffee to flow into carafe. 5. Close the tank cover. Press down to lock. The appliance is equipped with a safety interlock system. Note: The appliance will not operate if the tank cover is left open or the grinder box is not in place.
10. Start to operate: • Immediate grinding and brewing: Press the on/off button, the indicator “run” will light and the process will begin. • Programmed brewing: If you do not want the coffee maker to start operation immediately, you may set the automatic start function according to the “ Set the program time” instructions. 11. When beans finish grinding, the brewing process begins. Note: During operation, you can take out carafe, pour and serve at any time.
8. After brewing, the unit will keep warm for 2 hours and then automatically shut power off or press the on/off button twice to shut power off and unplug the power outlet. Pause n Serve This feature allows you to pour a cup of coffee before the entire brew cycle has been completed. By removing the Carafe, the flow of coffee will stop. Caution: Return carafe to warming plate within 30 seconds. Hot water continues to flow into the filter basket when this feature is used.
troubleshooting During operation, if the water tank cover or grinder box cover are not in place, the motor (if on) will be cut off and the LED display will flash. The LED will display according to the following: (1) If the tank cover is not in place, the display will show “OP1”. (2) If the grinder box is not in place, the display will show “OP2”. a.
Customer Assistance For faster service, please have the model number and product name ready for the operator to assist you. This number can be found on the bottom of your appliance and on the front page of this manual. Model Number:_____________________ Product Name:__________________________ Customer Assistance Number 1-877-207-0923 (U.S.) or 1-877-556-0973 (Canada) Keep these numbers for future reference! For more information, please visit us at www.gehousewares.
