Product Manual

2-6 SEER
®
Light 2040604-012D
Equipment Overview
4A
Name Function
1 Battery box Holds the batteries.
2 Battery box cover In direction indicated, lift the cover open and place
four new alkaline AAA type batteries in the battery
box.
3 Data transfer cable Used to transfer data from the SEER Light
recorder. When not in use, store the cable in the
guide on the backside panel.
4 Function buttons Used to enter controller modes. Press F1 to enter
Preview mode to confirm the quality of ECG
recording. Press F2 to enter Data Transfer mode to
transmit data to SEER card. Press F3 to enter
Review mode to confirm SEER card contents.
Press F4 to return to SEER mode.
5 F6 button Used to start recording of the SEER Light recorder
and to start transferring data to a SEER card.
6 Select (ENT) button Used to select items and navigate around the
display panel.
7 Patient information entry
keypad
Enter the patient’s alphanumeric information.
8 F5 button Used to enter Set-up condition mode to change
certain settings on the controller and recorder.