Product Manual

2-10 SEER
®
Light 2040604-012D
Equipment Overview
Before you connect the SEER Light Connect device to your Holter
analysis workstation, follow these steps to install the SEER Light
Hookup software.
NOTE
You must have administrator privileges to install the SEER Light
Hookup software.
1. Insert the SEER Light Hookup software CD in the CD drive of your
workstation.
NOTE
The computer you install the SEER Light Hookup software must
be running Windows 2000, 2000 server, XP or 2003 server.
The software cannot be installed on Windows NT, 98 or ME.
2. The SEER Light Hookup InstallShield Wizard appears. Choose the
appropriate language and select Next.
3. The SEER Light Hookup Setup welcome window appears. Select
Next.
4. The license agreement window appears. Review the license
agreement and select Yes.
5. The Destination Disk window appears. Highlight the disk in which
the SEER Light Hookup application will be installed. Select Next.
6. The software is now being installed. When finished, a message
appears asking if you would like to view the installation report.
Select Yes to view the report or No to continue.
If you select Yes, the Installation Report appears.
 To print the report, select the Print button.
 To view previous installation reports, select the View History
button. This button will be grayed out if no prior installations
were done on your computer.
7. Select Next when finished.
8. At the InstallShield Wizard Complete window, select Yes, I want to
restart my computer now.
9. Select Finish. Your computer will restart.
10. Log back in as Administrator.
11. Plug the Universal Serial Bus (USB) cable into the USB port of your
computer to load the USB drivers. Connect the USB cable to the
SEER Light Connect device.