Product Manual

2-12 SEER
®
Light 2040604-012D
Equipment Overview
The controller starts up in SEER mode automatically.
Transfer mode
Recorded data is transferred from the recorder to the controller from
within Transfer mode. Refer to “Transferring Data” on page 6-1 for more
information.
Press F2 to enter Transfer mode.
Set-up Condition Mode
Use the Set-up Condition mode to configure operating parameters for the
recorder and controller. Once configured, the settings will be saved if the
power is turned off.
1. Press the Power button and the F5 button simultaneously.
Continue to hold the F5 button while releasing the Power button.
The Set-up condition display mode opens.
2. Press the buttons to select a parameter.
3. Press the buttons to set the parameter’s conditions.
4. Press the F1 button to exit the Set-up Condition mode.
Selecting a Language
Follow these steps to change the language that the SEER Light
controller displays.
1. Press the Power button and the F5 button simultaneously.
Continue to hold the F5 button while releasing the Power button.
The Set-up condition display mode opens.
2. Press the 0 button to open the Language Selection display.
3. Use the Patient Information Entry keypad or the buttons to
select the desired language.
4. Press ENT to select the language.