Product Manual

2-14 SEER
®
Light 2040604-012D
Equipment Overview
Battery Power
The controller and the recorder use AAA alkaline batteries. Always
remove the batteries when storing either device.
SEER Light Controller
According to the battery power level, the battery icon will change.
The following table describes the battery power level icon(s).
Date and Time (controller) Used to set the date and time of the controller. The start time of the recorder is calculated
based on the date and time of the controller. The recorder does not have a time clock.
 The recorder receives the date and time information from the controller when the
recorder is started by the controller.
 Or, in instances when recording is initiated from the recorder, the recording start time
will be calculated from the time clock of the controller when the ECG data is
transferred to a SEER card from the recorder using the controller.
Setting the Date
1. Press the alphanumeric buttons to enter DD, MON (the 3-letter code for the month),
and YYYY in order. The Hungarian language version displays the date using the
yyyy-MON-dd format.
2. Press to confirm the new date.
Setting the Time
1. Press the alphanumeric buttons to enter HH and MM in order.
2. Press to confirm the new time.
Accelerometer Check Not used
Parameter Description