Product Manual

Recording Data
2040604-012D SEER
®
Light 5-11
081A
Starting the SEER Light Recorder
There are three ways to start the recorder.
 Startup with the controller:
The recorder can be started remotely by the controller. The controller
starts the recorder and at the same time the patient information (ID
number, age, gender, and name) and the recording date and time are
transmitted to the recorder memory. The recording date and time
information remains in the recorder if the batteries are removed
before transferring the data. See “Begin Recording with SEER Light
Extend Controller” on page 5-13.
 Startup with the connect:
In the SEER Light Hookup application, you will enter the patient
information (ID number, age, gender, and name) and then select the
Record button to start the recorder. See “Begin Recording with SEER
Light Connect” on page 5-14.
 Startup with the recorder button:
Bars indicate dual
pacemaker spikes