Product Manual

5-12 SEER
®
Light 2040604-012D
Recording Data
The recorder can also be started by pressing the record button. In
this case, do not remove the batteries from the recorder. Otherwise,
the recording date and time information will be erased from the
recorder memory.“Begin Recording with SEER Light Recorder
Button” on page 5-14.
Inserting Batteries in the SEER Light Recorder
If you are recording up to 24 hours of ECG data, use the SEER Light
recorder. If you are recording up to 48 hours of ECG data, use the SEER
Light Extend recorder.
8A
1. Slide the battery box cover to open.
NOTE
Install new batteries for each use to prevent loss of power and data.
2. Insert two new AAA type alkaline batteries.
3. Confirm the audible beep sounds for approximately 2 seconds.
In case of insufficient battery level, an audible alarm will
continuously sound. This indicates that new batteries are required.
4. Hold the battery string and slide the battery box cover to close.