Product Manual

Transferring Data
2040604-012D SEER
®
Light 6-3
NOTE
The SEER Light Controller (24 hour) is no longer available. The
SEER Light Extend Controller is compatible with both SEER Light
(24 hour) and SEER Light Extend (48 hour) recorders.
NOTE
The SEER Light Extend Recorder (48 hours) is compatible with
MARS v7.x and higher only. It is not compatible with MARS v4, v5,
or v6.
1. Remove the data transfer cable from the back side of the controller.
Switch on the controller’s power supply by pressing the POWER
button, as in the following graphic.
32A
2. Confirm the date and time. Change the date and time if it is not
correct. Refer to “Set-up Condition Mode” on page 2-12.
3. Insert flash card with the mark facing up into the controller. Pivot
the EJECT button to prevent inadvertent ejection of the flash card.
33Z
SEER Light Recorder/Controller Compatibility
SEER Light Controller (24
Hour)
SEER Light Extend
Controller (48 Hour)
SEER Light Recorder (24
Hour)
YES YES
SEER Light Extend
Recorder (48 Hour)
NO YES