Product Manual

C-8 CARESCAPE V100 Vital Signs Monitor 2036991-001C
Maintenance: Repairs
5. Insert the battery into the compartment.
6. Then replace the cover, help card tray, and screws. Insert the external DC
power converter plug into the external DC power socket and plug into an AC
outlet.
NOTE: Error code E00 appears (MEMORY LOST) alerting you that the user
settings (including alarm limits and inflation pressure) and date/time
will go back to default values.
7. Reset the date/time and applicable user settings.
CAUTION
Do not touch either the pin of the DC input connector or the
terminals within the battery compartment and the patient at
the same time.
Replacement batteries may be obtained from GE Medical Systems Information
Technologies.
Repairs
If your product requires warranty, extended warranty, or non-warranty repair
service, contact GE Medical Systems Information Technologies Technical Support
or contact your local representative.
Estimates for non-warranty repairs are provided at no charge; however, the
product must be sent to GE Medical Systems Information Technologies for an
estimate. To facilitate prompt service in cases where the product has external
chassis or case damage, please advise the representative when you call.
The representative will record all necessary information and will provide a
Return Authorization Number. Prior to returning any product for repair, a Return
Authorization Number must be obtained.