Product Manual

2-4 CARESCAPE V100 Vital Signs Monitor 2036991-001C
Getting Started: Setting up SpO2 Connections
NOTE: Care should be taken in reconnecting the cuff to a hose, ensuring
that threads of the cuff and hose are in alignment and no cross-
threading occurs.
5. Refer to the “NIBP” Section of this manual for complete instructions on
taking an accurate NIBP determination.
NOTES
 Use only GE CRITIKON BP cuffs. The size, shape, and bladder
characteristics can affect the performance of the instrument.
Inaccurate readings may occur unless GE CRITIKON BP cuffs are used.
Refer to Appendix B “Accessories” for reorder codes.
 The ADULT indicator encompasses both adult and pediatric patients.
Setting up SpO
2
Connections
1. Plug the appropriate SpO
2
sensor into the SpO
2
sensor extension cable.
2. Then plug the SpO
2
sensor extension cable into the SpO
2
sensor connector
on the monitor.
3. Refer to the applicable “SpO
2
” Section of this manual for complete
instructions on monitoring SpO
2
.
Setting up Temperature Connections
1. Connect the temperature probe cable to
the temperature probe connector on the
monitor.
2. Insert the temperature probe into the
probe holster at the side of the monitor.
3. Refer to the “Alaris Turbo Temp” Section
of this manual for complete instructions
on taking a temperature reading.