Product Manual

3-8 CARESCAPE V100 Vital Signs Monitor 2036991-001C
Product Overview: User Modes
Advanced Configuration Mode
Advanced configuration is used for configuring the monitor’s serial port
communication settings as well as viewing and printing the failure alarm history.
Advanced configuration mode displays the software revision in the Systolic and
Diastolic windows.
How to enter and exit advanced configuration mode
To enter advanced configuration mode:
 With the monitor off, press the On/Off button at the same time as pressing
and holding the Menu and - (minus) buttons.
To exit advanced configuration mode:
 With the monitor on, press the On/Off button for less than 5 seconds.
While in advanced configuration mode:
 All parameters are inoperable.
 The Systolic window displays ACF indicating the monitor is in Advanced
configuration mode.
 A failure alarm history can be viewed and printed.
NOTE: Refer to the service manual for instructions for use concerning
advanced configuration mode.
Service Mode
Service mode is used to configure and calibrate various components of the
monitor's hardware.
NOTE: Refer to the service manual for instructions concerning service mode.
Battery Low Shutdown
Battery low shutdown is entered when the high-priority BATTERY LOW alarm
has been active for 5 minutes. Refer to the “Alarms” Section for details and errors
codes. Refer to the service manual for detailed instructions.
System Failure
System failure occurs when the monitor has a depleted battery, or a hardware
or software failure. Refer to the “Alarms” Section for details and errors codes.
Refer to the service manual for detailed instructions.
User Modes
The V100 Monitor has four user modes that are available during clinical
operating mode: menu, cycle, limit adjustment, and history.