Product Manual

2036991-001C CARESCAPE V100 Vital Signs Monitor 4-3
Printer: Description
Description
The printer is an optional feature to the V100 Monitor. If your monitor contains a
printer, each time a printout is started the following information is printed.
Installing the Paper
Refer to the “Getting Started” Section for instructions.
Print Button
You can print in both clinical and advanced configuration modes. In clinical
mode, you can print both currently displayed values and history. In advanced
configuration mode you can print a failure alarm history. Refer to the service
manual for more information on the use of the Print button while in advanced
configuration mode.
In clinical mode, pressing the Print button prints everything on the screen. Since
measurements may have been taken at different times, a time stamp is printed
with each parameter. Values are printed in order of the most recent (newest) to
the oldest.
By pressing the Print button when in history mode, all entries currently stored in
the history are printed in order of the most recent to the oldest.
To tear off the printout, use a slight sideways action to pull the paper sharply up
across the edge of the door.
Note: If the Print button was pressed during the first 10 seconds of SpO
2
monitoring, dashes will appear for SpO
2
and pulse rate readings.
Monitor name and model
Current software revision
Area for patient
name and hand-
written comments
Unit of measure
Vital signs data,
if available
Column and
parameter labels
Date and time