Product Manual

4-4 CARESCAPE V100 Vital Signs Monitor 2036991-001C
Printer: Printouts
The availability of the printer is determined at the time the printout is started.
When the printer is unavailable:
 The Print button makes a negative key sound when you press it.
 Printouts of any type are not available and a high-priority E13 BATTERY
LOW alarm sounds when the BATTERY LOW indicator flashes.
 The printer is unavailable if it is out of paper, too hot, or if the monitor is in
any of the following
modes: cycle, alarm limit adjustment, menu, config, or
service.
Printouts
Current (Real Time)
For this printout, the following information may be printed:
 SpO
2
info line:
 The time the Print button was pressed.
 The displayed SpO
2
and pulse rate values are printed under the SpO
2
and pulse rate columns along with the time stamp.
 If values are not displayed, “---” is printed.
 PIr info line:
 The time the Print button was pressed—ONLY if the monitor is
configured for TruSignal SpO
2.
 The perfusion index measurement is printed when it is valid. Dashes are
printed when it is invalid (the sensor is not applied to the patient).
 NIBP info line:
 The displayed NIBP values and the time that these values were
completed.
 The displayed pulse rate values if they were completed at the same
time as the displayed NIBP values.
 Temperature info line:
 The values of a previous temperature measurement if they are still
displayed in the Temperature window.
 The time that the measurement completed.
 The above lines are printed in the order of most recent to oldest with the
exception of the PIr info line, which always follows the SpO
2
info line. If the
date changes between entries, a single line containing the date is printed.