Use and Care Guide

7
Programming Your Remote, cont.
the POWER button—if the device
turns off, no further programming is
required for that device. If the device
does not turn off, return to step 3-5
andusethenextcodefoundinthe
code list. Continue this process until a
code for your device is found.
7. Repeat this process for each device
(forexampleTV,DVD,CBL,SAT,DVR,
AUX) in your home entertainment
system you wish to control.
Programming Notes
• Ifyourdevicedoesnotrespondtotheremoteafter
trying all codes listed or your brand is not listed in
the code list, use the Auto Code Search method to
program your remote.
• Sometimestherstcodethat“works”withyour
device may operate only a few functions of your
device. There may be another code in the code
list that performs more functions. Try other codes
from the code list for more functionality.
• WiththeDirectCodeEntrymethod,youcan
program any device button to control any device
in your home entertainment system.
Forexample,youcanusetheDVR/AUX device
button to control an audio receiver or a DVD, VCR,
satellite device, etc.
• Forcombinationdevices,youmayhavetoentera
codeforeachdevice.Forexample,foraVCR/DVD
device, you may have to enter a code for the DVD
under the DVD button and enter a code for the
VCR using a different device button on the remote.
• Writedownthecodefoundtooperateyourdevice
for future reference.