RM24978 Universal Remote Instruction Manual
Table of Contents Setup .................................................................... 3 Battery Installation ........................................... 3 Battery Saver ................................................... 3 Code Saver ...................................................... 3 Code Setup ...................................................... 3 Button Functions .................................................. 4 DVD Functions ................................................
Button Functions Some buttons on the remote might have functions that are referred to by different names on the device you are controlling. E.G. PREV.CH may be called RECALL, or ENTER may be called DISPLAY. These differences depend on the brand and model of your product. Also, this remote can only operate features that exist on your product. E.G., your product must have PREV.CH ability for the PREV.CH button to operate this feature. TV, VCR, etc. Red Indicator Selects product Lights when any to be operated.
DVD Functions This remote has several dedicated buttons used for DVD functions. The descriptions may vary from your original remote descriptions. SCAN+ and SCAN- buttons control the speed of Fast Forward and Reverse Playback respectively. SKIP (Channel Up & Down) buttons respectively locate the succeeding or preceding Chapters or Tracks on a disc. SUBTITLE (CC) Turns the subtitles on or off. TITLE Brings up the DVD Title Menu screen. REPEAT A-B button performs DVD players “A-B Repeat” (or RPT A.
Code Search Direct Code Entry 1. Press and hold the CODE SEARCH button until the red indicator stays on, then release the CODE SEARCH button. 2. Press and release the desired mode button (TV, VCR, etc.). The red indicator blinks, then stays lit. 3. Enter the 4 digit code from the code tables (on separate sheet). Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes. 3. Press and quickly release the desired mode button (TV, VCR, etc.).
Using Your Remote Code Identification Using Your Remote, cont. Controlling Devices with Separate Power On and Off Buttons The Code Identification Feature allows you to identify the four digit library code stored under your device key. For example, if you want to find out what four digit code is stored under your TV device key, follow the six steps below: 1. Press and hold the CODE SEARCH button until the red indicator stays on. Release the CODE SEARCH button. 2.
Using Your Remote, cont. Using Your Remote, cont. Volume/Mute Control and PunchThrough Setting any Mode to use its own Volume/Mute Control This remote lets you select which device Mode controls your Volume/Mute buttons. The remote is initially set for all device Modes to use their own Volume/Mute control if present. If the programmed code has no Volume/Mute operation of its own then those buttons will punch-through control to the TV Mode device without needing to change to TV Mode.
Troubleshooting Remote does not operate your product. • • • • Press the mode button of the product you want to control. Program the remote with a new code. Install new batteries. (You might have to reprogram your remote after installing new batteries.) Remote may not be compatible with your product. Remote does not operate some features of your product. • • Sometimes a particular code might operate some features but not all. Try programing remote with a new code.
RM24978 Universal Remote Instruction Manual Jasco Products Company 311 N.W.
