TDS

ManualsBrandsGE ManualsCaulkSupreme Silicone 10.1 oz. Clear Window and Door Caulk

Product Data Sheet

Page 1 of 6

Supreme Silicone Window & Door Sealant

Product Description

Supreme Silicone Window & Door sealant is a premium 100% silicone sealant with exceptional adhesion

and exibility. This sealant oers 50% joint movement capability and can withstand extreme expansion

or contraction associated with wide temperature uctuations. Ideal for a number of highly demanding

exterior and interior projects, this durable sealant can be rain-ready in as little as 30 minutes, is resistant

to UV degradation and has lifetime mold-free product protection. Supreme Silicone Window & Door

sealant’s airtight and permanently waterproof seal helps keep weather out and reduce energy

consumption. Backed by a lifetime guarantee.

Product Attributes

• Meets ASTM C-920 Class 50 specications

• 100% more exibility than Class 25 sealants

(1)

• 7X stronger adhesion than GE Silicone 1* sealant

(2)

• Resists mold

(3)

with lifetime mold-free product protection

• 30-minute rain-ready

(4)

• 100% silicone is 100% waterproof

• Will not discolor most high-end metal nishes such as chrome, bronze and nickel

• Will not break down due to extreme weather conditions, freeze & sun-proof

• Neutral cure with low odor

• Permanent exibility

• Shrink-proof & crack-proof

• Excellent adhesion to wet and dry surfaces

(5)

• Freeze/thaw stability

• Non-paintable

(1) Based on comparison of exibility performance with ASTM C-920 Class 25 consumer sealants

(2) Based on comparison with our GE Silicone 1 sealant using ASTM C794 Peel Adhesion test.

(3) Fully cured sealant is resistant to stain-causing mold and mildew. Regular cleaning of sealant is required however,

as soap and other residue can cause secondary mold and mildew growth.

(4) Exposure to water possible in as little as 30 minutes with bead size max 3/16”, temperature min 65°F and humidity

min 50%. Otherwise, sealant should not be exposed to water for 8 hours. Do not touch or clean sealant for

24 hours.

(5) Can be applied to damp or dry surfaces. For wet surfaces, wipe o excess water before applying. Do not apply to

materials that are water saturated such as wood and concrete. Do not use in areas of ponding water.

*Silicone 1 is a trademark of Momentive Performance Materials Inc.

Summary of content (6 pages)

PAGE 1
Product Data Sheet Supreme Silicone Window & Door Sealant Product Description Supreme Silicone Window & Door sealant is a premium 100% silicone sealant with exceptional adhesion and flexibility. This sealant offers 50% joint movement capability and can withstand extreme expansion or contraction associated with wide temperature fluctuations.
PAGE 2
Product Data Sheet Basic Uses Supreme Silicone Window & Door sealant is used in a wide variety of applications including, but not limited to windows, doors, siding, trim, vents, asphalt, cement, brick, mortar, and attic/basement applications.
PAGE 3
Product Data Sheet Typical Properties Typical physical property values of Supreme Silicone Window & Door sealant as supplied and cured are set forth in the tables below. Typical Properties – Supplied Property Value Test Method Consistency Paste VOC (ex. water & exempt) < 35 g/L CARB Chem Curing (n.a.) VOC < 3.0 wt% Odor Light Ammonia Work Life (tooling time) 6-12 minutes Tack Free Time (@ 72°F (22°C), 50% RH) 30 minutes Rain-Ready 30 minutes Sag/Slump < 0.
PAGE 4
Product Data Sheet Masking The use of masking tape is recommended where appropriate to ensure a neat job and to protect adjoining surfaces from over-application of sealant. Masking tape should be removed immediately after tooling the sealant and before the sealant begins to skin over (tooling time). Instructions 1. R emove dirt, grease, moisture, soap residue & old caulk from area to be sealed. Use backer rod for gaps larger than 1/2” x 1/2” (12.7mm x 12.7mm).(1) 2.
PAGE 5
Product Data Sheet Specifications Meets ASTM C-920, Type-S, NS, Class 50, Use A, G & 0 Test Requirements. Requirements. Federal Specification TT-S-00230C, TT-S-001543A Suggested References In addition to the guidelines provided herein, Momentive Performance Materials recommends that designers and users of Supreme Silicone Kitchen & Bath sealant familiarize themselves with the latest editions of following industry guidelines and best practices: 1.) ASTM C1193 Standard Guide for Use of Joint Sealants.
PAGE 6
Product Data Sheet Customer Service Centers Americas +1 (866) 275-4372 Email: askgesa@momentive.com Visit us at www.GEsealants.com THE MATERIALS, PRODUCTS AND SERVICES OF MOMENTIVE PERFORMANCE MATERIALS INC. AND ITS SUBSIDIARIES AND AFFILIATES (COLLECTIVELY “SUPPLIER”), ARE SOLD SUBJECT TO SUPPLIER’S STANDARD CONDITIONS OF SALE, WHICH ARE INCLUDED IN THE APPLICABLE DISTRIBUTOR OR OTHER SALES AGREEMENT, PRINTED ON THE BACK OF ORDER ACKNOWLEDGMENTS AND INVOICES, AND AVAILABLE UPON REQUEST.