SDS

Version: 1.8
Revision Date: 07/28/2016
GE286
SDS_US
5/14
PEL
0.1 mg/m3
US. OSHA Table Z-1 Limits for Air
Contaminants (29 CFR 1910.1000)
(02 2006)
TWA
0.1 mg/m3
US. OSHA Table Z-1-A (29 CFR 1910.1000)
(1989)
This product contains one or more substances with an occupational exposure limit. However, the respirable
particle(s) of this/these substance(s) are inextricably bound within the polymer matrix. Therefore, we do not
expect an exposure to this/these substance(s) during normal use of this product. Tooling or machining of the
cured product (sanding, cutting, milling) may release hazardous, respirable substances.
Appropriate Engineering
Controls
Eye wash facilities and emergency shower must be available when
handling this product.
Individual protection measures, such as personal protective equipment
General information:
Ventilation and other forms of engineering controls are preferred for
controlling exposures. Respiratory protection may be needed for non-
routine or emergency situations.
Eye/face protection:
Safety glasses with side shields
Skin Protection
Hand Protection:
Cloth gloves.
Other:
Wear suitable protective clothing and eye/face protection.
Respiratory Protection:
If exposure limits are exceeded or respiratory irritation is experienced,
NIOSH/MSHA approved respiratory protection should be worn. Supplied
air respirators may be required for non-routine or emergency situations.
Respiratory protection must be provided in accordance with OSHA
regulations (see 29CFR 1910.134).
Hygiene measures:
No data available.
9. Physical and chemical properties
Appearance
Physical state:
solid
Form:
solid
Color:
Light brown
Odor:
Ammonia.
Odor threshold:
No data available.
pH:
not applicable
Melting point/freezing point:
No data available.
Initial boiling point and boiling range:
not applicable