TDS

Product Data Sheet
Basic Uses
Supreme Silicone Kitchen & Bath sealant is used in a wide variety of applications including, but not limited to showers, tubs, sinks, tile,
countertops and xtures, as well as other kitchen and bath applications.
Adheres To
Common kitchen and bath materials including most metals, plastics and wood, glass, drywall, plaster, granite, cultured marble, ceramic and
porcelain tile, natural stone, cement board, composites, Formica, berglass, aluminum, and painted surfaces, as well as metal nishes such
as chrome, bronze & nickel.
Supreme Silicone Kitchen & Bath sealant should not be considered:
• For structural repairs
• For use underwater or in other applications where the product will be in continuous contact with water
• For use in food contact applications
• When painting of the cured sealant is desired
• For use on aquariums
• For use on surfaces with special coatings, such as mirrors, without approval of the article’s manufacturer
• Under exceedingly hot or cold conditions (see Sealant Application section for additional information)
• On frozen or contaminated surfaces
• On excessively basic or acidic substrates
• For use on surfaces that are above 100°F (49°C)
Packaging
Supreme Silicone Kitchen & Bath sealant is currently available in 10.1 . oz. (299 mL) plastic caulking cartridges and 2.8 . oz. (82.8 mL)
plastic squeeze tubes. Plastic cartridges and squeeze tubes are packaged as 12 units in cardboard boxes. Cartridges are dispensed using
a single component hand or air-pressured caulking gun.
Page 2 of 6
Supreme Silicone Kitchen & Bath Sealant
Model # Stock # Color Product UPC Size Carton Size Coverage (
3
/16” bead)
M90007 GESUPSILKB WHT White 077027900071 10.1 fl. oz. 12 each 51 Linear Feet
M90006 GESUPSILKB CLR Clear 077027900064 10.1 fl. oz. 12 each 51 Linear Feet
M90010 GESUPSILKB ALM Almond 077027900101 10.1 fl. oz. 12 each 51 Linear Feet
M00011 SIL2KB CLR Clear 077027900118 2.8 fl. oz. 12 each 13 Linear feet
White Clear Almond
Installation
Sealants may not adhere or maintain long-term adhesion to substrates if the surface is not prepared and cleaned properly before sealant
application. Using proper materials and following prescribed surface preparation and cleaning procedures is vital for sealant adhesion.