Full Product Manual

2) Main Boom Assembly:

a) Take the Main Boom 1, turn it with the short

dipoles facing up.

b) Take the Main Boom 2, turn it with the VHF

connector rods marked L and R facing up and slide

the Main Boom 2 onto the Main Boom Connector Piece

pre-attached to the Main Boom 1. (Fig. 2)

Fig. 2

3) Assembling the Main Boom To The Main Housing Unit:

a) Position the Main Housing Unit with the bottom side

facing up. Remove the four #6 X 32 Wing Nuts and

the two M4 Lock Washers.

b) Lay the assembled Main Boom into the Main Housing

Unit. (The Main Boom with the short dipoles is

positioned at the narrow end of the Main Housing Unit)

i. Secure the Main Boom assembly to the Main

Housing Unit using two #6 X 32 Wing Nuts just

removed. (Fig. 3a)

Fig. 3a