Full Product Manual

ii. Slide the two VHF connector rods marked L and R

over the two bolts on the Main Housing Unit, slide

the M4 Lock Washers onto the bolts and secure

with the #6 X 32 Wing Nuts. (Fig. 3b)

Fig. 3b

iii. Unfold the two VHF element rods and snap into the

bracket. (Fig. 3c)

Fig. 3c

4) Attach the Mast Clamp to the Main Boom:

a) Remove the two #10 X 24 Wing Nuts from the ”U”

Bolt and Clamp Assembly.

b) Attach the Brass Plate provided with the “U” Bolt and

Clamp Assembly to the Antenna Main Boom. (Fig. 4)

c) Slide the “U” Bolt into the holes on the Antenna

Main Boom from the opposite side of the Brass Plate. (Fig. 4)

Fig. 4

e) Thread the Wing Nuts partially back onto the “U” Bolt. (Fig. 4)