Full Product Manual

12
5) Installing the Assembled Antenna:
a) Locate a position on the house that is far away from
power lines. Refer to the Important Safety
Instructions.
b) Secure the Mounting Bracket to the location selected
for the antenna. The 1/4 X 2” Lag Screws have been
provided for some installations.
c) Connect the “J” mount to the Mounting Bracket
(Fig. 5a) using the M6 X 50mm Bolts, M6 Locking Nuts
and M6 Washers.
Fig. 5a
d) Position the J-Mount perpendicular to the ground
using a small level.
e) Slide the Antenna onto the “J” Mount. (Fig. 5b) Point
the small end of the antenna in the direction of
the broadcast towers in your area. Tighten
the Wing Nuts on the “U” Bolt when the antenna is in
the desired position.
Fig. 5b