- General Electric Juice Extractor Owner's Manual

OPERATION
Before first use
• Remove all packaging materials, labels and/or stickers from your juice extractor.
• Clean your juice extractor thoroughly before using for the first tim ( Cleaning). The
juice extractor must not be connected to power during cleaning.
Warning: Do not immerse the juice extractor in water or any liquids. This may cause
electric shock or damage the appliance.
Before operation
• Unwind the power cord (9) from the base (8) of juice extractor (ill.
a
).
• Lead the power cord (9) through the guide on the bottom of base (8) (ill.
b
).
• Place the rubber feet (10) on the bottom of base (8) on a flat, even and steady
surface (ill.
c
).
Operating instructions
Always disconnect the power plug (9) from the outlet when putting on or taking off
parts.
Before plugging in the juice extractor check that the electrical circuit is not overloaded
with other appliances.
Assembly
• Place the pulp container (12) next to the base (8). Make sure the guide rail of
the base is inserted into the pulp container’s groove (ill.
d
/
e
).
• Place the filter holder (4) on the base (8) (ill.
f
/
g
).
• Insert the stainless steel filter (3) and turn until it locks unto place (ill.
h
).
Warning: Danger of laceration. The center of the stainless steel filter (3) contains
small blades to process fuits and vegetables. Do not touch the blades
when handling the stainless steel filter (3).
• Place lid (2) on the appliance (ill.
i
).
• Insert the food pusher (1) in the feeding chute (2). Make sure the ridge of the
feeding chute (2) fits into the notch on the food pusher (1) (ill.
j
).
•
Close locking latches (6): Lift up the two latches (ill.
k
) until they lock into
place (ill.
l
/
m
).
• Connect the power plug (9) with a wall outlet (ill.
n
).
• Place a glass or mug underneath the spout (5) (ill.
o
).
7
169201-EN-06.indd 7 4/30/2009 10:04:05 AM