98505 Wireless Optical Presentation Mouse Instruction Manual For technical support contact Jasco Products at 1-800-654-8483 or www.jascoproducts.
TABLE OF CONTENTS Package Contents ............................................................................................ 2 System Requirements .................................................................................... 2 Battery Installation .......................................................................................... 3 Mouse Installation............................................................................................ 3 Reconnecting the Mouse to the Receiver..........
Battery Installation 1. Press the battery release button on top of the mouse. 2. The battery door will open. 3. Insert 1 AA battery, being sure to match the polarity of the battery with the polarity markings inside the battery compartment. 4. Close the battery door. Mouse Installation 1. Slide the USB Receiver out of the bottom of the mouse. 2. Once the receiver has been removed, the Battery Meter will light up. LED Green Light = battery life is good. Red Light (Blinking slowly) = battery is low.
Reconnecting the Mouse to the Receiver This mouse will usually automatically connect to the receiver. If needed, you can connect the mouse to the receiver by following these steps. 1. Press the button on top of the receiver. The LED will light up on the receiver. 2. Press the button on the bottom of the mouse. It is located where the receiver is stored. 3. The LED on the receiver will blink and you are finished.
Presentation Mode To switch your mouse to Presentation Mode please slide the switch on the bottom of the mouse towards the presentation icon. Presentation Mode Functions Your mouse is equipped with a variety of functions to help assist you with any presentation. Please refer to the diagram above for a short description of the button functions. !CAUTION! Do not aim or look into the integrated laser pointer. Direct exposure to laser will cause damage to the eye.
Mouse Suite Software (for Windows® Vista, XP & 2000 only) The Mouse Suite is a software program with many features that give amazing functionality to your GE mouse. Here is a brief overview. Installation Procedure 1. Insert the Installation CD into the computer CD drive. 2. Run the file named “Setup”. 3. Follow the instructions on the screen. 4. Click Finish when completed. Buttons Tab From this screen you can set the function of each button on your mouse. There are over 33 functions to choose from.
1. Select the button you want from the Button drop down menu. 2. Next select the function you want by using the Function drop down menu. 3. After you have selected the features you want click apply at the bottom of your screen. You may change these features at any time. You may also check your battery life from this screen. The battery indicator is located on the right side of the window. Magnifier Function This feature allows you to use the scroll button as a magnifier.
Double-Click Tab This screen allows you to set the double-click speed of your mouse. Use the slider to set the desired speed. You must click Apply to update any changes. Orientation Tab This feature allows you to set the orientation of the mouse while finding the most comfortable position to hold the mouse. Please follow the directions on the screen to set the orientation.
Wheel Tab This screen allows you to select different wheel operations. You may also select vertical scrolling speed as well as horizontal scrolling speed. If you would like to reverse the scrolling direction of the mouse, please check the box labeled Reverse Scrolling Direction. Pointer Utility Tab From this screen you can select different functions for the pointer. Pointer Wrap The pointer wrap feature allows the pointer to go in one side of the screen and come out of the opposite side.
Slow Motion This feature allows the pointer to move in slow motion by pressing the Shift key. This will help the precision of the pointer. X-Focus This feature allows you to make an inactive window active by simply moving the pointer over the title bar. Troubleshooting • Mouse does not work properly - Check the battery life on your mouse. If it is low please install new batteries. - Reconnect your mouse to the receiver. Press the link button on the receiver.
Five Year Limited Warranty Jasco Products Company warrants this product to be free from manufacturing defects for a period of five years from the original date of consumer purchase. This warranty is limited to the repair or replacement of this product only and does not extend to consequential or incidental damage to other products that may be used with this unit. This warranty is in lieu of all other warranties express or implied.
• Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. CAUTION: Any changes of modifications not expressly approved by the grantee of this device could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules.
