Model 99000 Class 1 Audio/Data USB Adapter User Manual CAUTION Do not use this product on an airplane in transit as this could disrupt communication. Vers.
FCC Information: The Federal Communication Commission Radio Frequency Interference Statement includes the following paragraph: This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Table of Contents Using the Product ...................................................................................3 AV Mode .................................................................................................3 Data Mode ............................................................................................4 Starting to Use BlueSoleil™....................................................................5 Listening to Music ................................................................
A/V Mode Only, cont. 1) Turn on the power to the computer you plan to stream audio from. 2) Move the switch on the GE 99000 to the A/V setting PRIOR to plugging it into your computer’s USB port. 3) Plug the GE 99000 into an open USB port on your computer. Your computer will begin to install the necessary windows drivers to support this GE 99000 USB Transmitter. 4) Wait until this process is completed. This could take up to 2 minutes for your computer to configure the device.
1. Setting Up a. Please make sure your computer uses Windows® operating system 98SE/ME/2K/ XP or later and all Windows® updates have been installed. b. Put the BlueSoleil CD in your computer CD-ROM drive. i. The software should start automatically. ii. If it does not use your Windows® Explorer and navigate to your CD-ROM drive. Find the “Setup” file and double click it. c. Choose the language version and follow the instruction to complete the installation.
d. The orange ball in the middle of the screen stands for your own GE 99000 dual mode adapter. When you want to search for Bluetooth® devices, you need to click on the ball. You can also click “View”> ”Refresh Devices” to find new devices. Available Services 1) Turn on any Bluetooth® devices you want to synchronize data with. 2) Use BlueSoleil™ to discover the devices by clicking on the orange circle in the center.
6) After setting up BlueSoleil™, and selecting the device, you need to launch Windows Media Player, Music Match or another media player to play music. You will hear music from the receiver shortly. Please note that you need to launch BlueSoleil™ first, and then go to your computer’s Media Player. 7) If you don’t hear any music, please check that you have selected a device and its service and that they are connected. The BlueSoleil™ icon should also turn green to show that it is connected and in use.
4) Right click the device icon and choose “Refresh Services”. You can also click “View”>”Refresh Devices.” 5) Right click the device icon. Choose “Connect”>”Bluetooth® Headset Service” or click the first-from-the-right icon. Note: After 25 seconds without answering, it will stop ringing and system will disconnect automatically. Please repeat the set up procedure to proceed. You can not connect to Bluetooth® enabled phone when you are using Internet telephony. Connecting to MSN® 1) Launch MSN® Messenger.
Using Phone Services Please see your phone manual for how to activate and connect your phone’s Bluetooth® service. Pair with a phone 1) Find a Bluetooth® enabled phone. 2) Use BlueSoleil™ to find it. 3) Right click the phone icon and choose “Refresh Services”. You can also click “View”>”Refresh Devices.” 4) Available services will be shown as yellow icons. 5) Choose the service you want to use. 6) Before you choose any services, you need to pair with the phone first. You should enter the passkey in the phone.
3) Verify that the receiver is within the specified range of 100m from the adapter. 4) Check if any other Bluetooth® device has connected to the receiver. 5) Turn off the receiver and unplug the GE 99000 adapter. Power on the receiver and plug in the GE 99000 adapter and try connecting again. No music is being transmitted. In rare cases it may be necessary to manually set your computer to play through your Bluetooth® device.
Specifications, cont. Profile Supported - HCI Mode LAN Access (LAP) Synchronization (SYNC) Object Push (OPP) Generic Object Exchange (GEOP) Headset (HSP) Hardcopy Cable Replacement (HCRP) Human Interface Device (HID) RX Sensitivity < 0.1% BER at -86 dBm Output/Power -6dBm to 17dBm Working Distance up to 300 ft./100m in open space* Frequency Band 2.400~2.
Limited One-Year Warranty Jasco Products Company warrants this product to be free from manufacturing defects for a period of one year from the original date of purchase. This warranty is limited to the repair or replacement of this product only and does not extend to consequential or incidental damage to other products that may be used with this unit. This warranty is in lieu of all other warranties expressed or implied.
