Specifications

ManualsBrandsGE ManualsElectrical EquipmentA19 Clife LED lamp with Bluetooth

GE Connected A19 Clife LED lamp, input 120Vac, frequency was 60Hz, high

efficiency, safety & stability output. Use Bluetooth 5.0 chip technology to realize the

far distance control. Through the APP to control the PWM signal to dim and even

control the switch on & off of the bulb.

Product features:

1. Controlled by Bluetooth 5.0 to realize the far distance control.

2. CCT range is 2000K-7000K, default CCT is 2700K.

3.With advanced chips to make sure the bulb with high efficiency, low consumption

and stability.

4. Internal constant current output to make sure the high power conversion efficiency

and stability output.

Product Name

A19 Clife LED lamp

Brand Name

Model No.

FCC:CLEDA199L2@

LED9D2A19/CL@

（@ Can be followed by additional

letters/numbers which indicate

packaging）

IC:CLEDA199L2 @

LED9D2A19/CL@

（@ Can be followed by additional

letters/numbers which indicate

packaging）

Working Voltage

120Vac

Bluetooth Specification

BLE5.0 Single mode

Frequency Range

2402-2480MHz(L:2402 M:2442 H:

2480)

Channel Number

Channel Separation

2MHz

Type of Modulation

GFSK

Data Rate

1Mbps(GFSK)

Antenna Type

Integral Antenna

Peak Antenna Gain

0dBi

For additional help, regulatory and safety Information, please go to:

www.cbyge.com

FCC ID：PUU-A19-SW-IIT

Summary of content (3 pages)

PAGE 1
FCC ID：PUU-A19-SW-IIT GE Connected A19 Clife LED lamp, input 120Vac, frequency was 60Hz, high efficiency, safety & stability output. Use Bluetooth 5.0 chip technology to realize the far distance control. Through the APP to control the PWM signal to dim and even control the switch on & off of the bulb. Product features: 1. Controlled by Bluetooth 5.0 to realize the far distance control. 2. CCT range is 2000K-7000K, default CCT is 2700K. 3.
PAGE 2
Federal Communications Commission (FCC) Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. The grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance.
PAGE 3
IC Statement: This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil est conforme avec Industrie Canada RSS exemptes de licence standard(s).