User manual
– 37 –
GEA01006
ScrewsScrews
5. Remove 7 screws from the exhaust duct and
position to access the heat shield.
GEA01004
ScrewsScrews
Heat SheildHeat Sheild
6. Remove 2 screws, heat shield, and insulation.
GEA01017
ScrewsScrews
ScrewsScrews
7. Remove 8 screws from the heater cover and
position to access the heaters.
GEA01008
Metal TabsHalogen
Heater
Ceramic
Heater
Heat
Reflector
8. Disconnect the heater wiring.
Caution: Do not touch the halogen heater with
bare hands. Touching the halogen heater with
bare hands may cause heater failure.
9. Straighten metal tabs and remove all remaining
screws and the heater assembly.
GEA01009
Sheath HeaterSheath Heater Wire Leads
Wire Leads
Wire Leads
10. Remove the sheath heater.
Thermistor
1. Remove the outer case (see procedure).
2. Disconnect the thermistor wiring from the
PCB.
GEA01004
ScrewsScrews
Heat SheildHeat Sheild
3. Remove 2 screws, heat shield, and insulation.