Specification Sheet
P-8/2008
GE Lighting Solutions • 1-888-MY-GE-LED • www.gelightingsolutions.com
1 - 8 8 8 - 6 9 - 4 3 - 5 3 3
Aluminum ROunD TAPERED AREA
liGHTinG POlES
10 TO 20 fEET (3 TO 6 mETERS)
T10CSEML, SEMTP16M, P17M
REFERENCES
See Page P-21 for Pole Base Data
See Page P-2 for Pole Selection Guidelines
SPECIFICATION FEATURES
• Round tapered aluminum shaft
• Satin ground finish
• Shaft lengths from 10 to 20 feet
• Three inch OD top for mounting
SUGGESTED LUMINAIRE APPLICATIONS
BASE TYPE E
Embedded
Base
POLE SELECTION TABLE
Shipped with pole: anchor bolts, anchor bolt covers, hardware, and anchor bolt circle template.
Transformer base choice includes door cover and all other parts required.
Maximum Recommended
Total Load
Approxi-
Nominal NOTE: With embedded mate Trans-
Mounting Weight 80 90 100 Ordering base, shaft length Weight Anchor former
Height (ft) (lbs) MPHI MPHI MPHI Number is 2 ft greater (lbs) Base Base
10 50 4.1 3.2 2.4
ARTA103S4.0ASNX 4.0 X 3.0 X 10-0 X 0.125
20 40 42
12 50 3.0 2.2 1.6
123S4.0ASNX 4.0 X 3.0 X 12-0 X 0.125
23 40 42
12 95 6.4 5.0 4.0
123S5.0ASNX 5.0 X 3.0 X 12-0 X 0.125
25 41 42
14 50 2.0 1.4 0.9
143S4.0ASNX 4.0 X 3.0 X 14-0 X 0.125
25 40 42
14 95 5.2 3.9 3.2
143S5.0ASNX 5.0 X 3.0 X 14-0 X 0.125
29 41 42
14 110 7.9 6.2 4.9
143S5.0BSNX 5.0 X 3.0 X 14-0 X 0.188
41 41 42
16 50 1.1 0.8 0.5
163S4.0ASNX 4.0 X 3.0 X 16-0 X 0.125
29 40 42
16 95 4.1 3.2 2.5
163S5.0ASNX 5.0 X 3.0 X 16-0 X 0.125
33 41 42
16 110 6.5 5.1 4.0
163S5.0BSNX 5.0 X 3.0 X 16-0 X 0.188
46 41 42
18 60 3.4 2.6 2.0
183S5.0ASNX 5.0 X 3.0 X 18-0 X 0.125
36 41 42
18 116 5.5 4.2 3.3
183S5.0BSNX 5.0 X 3.0 X 18-0 X 0.188
52 41 42
20 50 2.5 1.9 1.5
203S5.0ASNX 5.0 X 3.0 X 20-0 X 0.125
40 41 42
20 95 4.5 3.4 2.7
203S5.0BSNX 5.0 X 3.0 X 20-0 X 0.188
57 41 42
Shaft Dimensions
Bottom OD X Top OD X
Length X Thickness
(in. X in. X ft-in. X in.)
Pole Base Data
Item Number
Eective Projected
Area (sq ft)
single luminaire
• Black and dark bronze finishes available
• Choice of anchor, transformer, or
embedded base
• Paint finish is powder coat
ORDERING NUMBER LOGIC (See Pole Selection Table for actual Ordering Numbers)
A
PRODUCT IDENT
(LUMINAIRE
USAGE)
X
T
SHAFT
SHAPE
X
A
POLE
MATERIAL
X
10
NOMINAL
MOUNTING
HEIGHT (FT)
XX
4.0
SHAFT DIMENSIONS
BOTTOM SHAFT
OD (IN.)
XXXX
SN
FINISH
XX
A
BASE TYPE
X
A = Area T = Tapered A = Aluminum 10 = 10
12 = 12
14 = 14
16 = 16
18 = 18
20 = 20
4.0 = 4.0
5.0 = 5.0
BL = Black
DB = Dark bronze
SN = Satin ground
(Standard)
NOTE: if black or
dark bronze nish is
required, substitute
BL or DB for SN in
ordering number
listed in Selection
Table
A = Anchor
(See illustration above)
E = Embedded
(See illustration above)
T = Transformer
(See illustration above)
NOTE: Substitute A, E, or T
for X in ordering number
listed in Pole Selection
Table.
R
POLE
CROSS
SECTION
X
R = Round
3S
MOUNTING
XX
3S = 3-in. OD top
for single
luminaire
A
WALL
THICKNESS (IN.)
X
A = 0.125
B = 0.188
BASE
TYPE A
Anchor
Base
BASE TYPE T
Transformer
Base
For more Decorative Pole selections,
go to www.gelightingsolutions.com
StreetDreams™ Brochure OLP-2770C.