Specification Sheet

2008/P-19
GE Lighting Solutions • 1-888-MY-GE-LED • www.gelightingsolutions.com
1 - 8 8 8 - 6 9 - 4 3 - 5 3 3
Nominal Pole Bolt Circle Base Plate Anchor Bolt
Ordering Mounting Shaft Weight Diameter Size Size
Number Height (ft) Size (in.) (lbs) 70 80 90 100 (in.) (sq in. X thickness [in.]) (in.)
ASHS20XX4.07PP 20 4.00 217 16.2 11.6 8.5 6.2 8.5 9.75 X 0.750 3/4 X 17 X 3
25XX4.07PP 25 4.00 160 10.6 7.1 4.8 3.1 8.5 9.75 X 0.750 3/4 X 17 X 3
25XX6.411PP 25 6.41 254 25.2 18.0 13.0 9.3 12.5 11.88 X 0.875 1 X 36 X 4
30XX4.07PP 30 4.00 120 6.8 4.0 2.1 0.8 8.5 9.75 X 0.750 3/4 X 17 X 3
30XX6.411PP 30 6.41 230 18.4 12.5 8.3 5.1 12.5 11.88 X 0.875 1 X 36 X 4
35XX7.211PP 35 7.18 160 12.7 7.1 3.2 – 13.5 12.63 X 0.875 1 X 36 X 4
35XX7.17PP 35 7.13 155 28.5 22.0 16.9 12.1 13.5 12.63 X 1.250 1 X 36 X 4
39XX7.17PP 39 7.13 110 28.3 19.5 13.5 9.2 13.5 12.63 X 1.250 1 X 36 X 4
NOTE: All 4-inch shaft size poles are non-tapered; all poles above 4-inch shaft size are tapered.
STEEL SQuARE EXTERNAL HINgED AREA LIgHTINg POLES
20 TO 39 fEET (6 TO 12 mETERS)
Shipped with pole: anchor bolts, hardware, and anchor bolt circle template.
Eective Projected Area (sq ft) MPHI
Max Recommended Total Load
WINCH/CHAIN KIT*
Ordering Number Used With Pole
M180A ASHS20XX4.07
M180A ASHS25XX4.07
M136 ASHS25XX6.411
M180A ASHS30XX4.07
M136 ASHS30XX6.411
M135 ASHS35XX7.17
M135 ASHS35XX7.211
M135 ASHS39XX7.17
NOTE: *One required per pole.
CAUTION: To prevent damage to the pole the chain
and/or cable must be kept taut when raising and
lowering the pole.
WINCH DETAIL
POLE SELECTION TABLE
HINGE SECTION DETAIL
REFERENCES
See Page P-2 for Pole Selection Guidelines
Removable design to
be used only during
maintenance. Not to
be installed perma-
nently.