Brochure

ManualsBrandsGE ManualsOutdoor FixturesGE ASSA

GE Lighting Solutions • 1-888-MY-GE-LED • www.gelightingsolutions.com

1 - 8 8 8 - 6 9 - 4 3 - 5 3 3

OLP-2912

Page-1

FLOODLIGHTING BRACKETS FOR ALUMINUM

POLES WITH PLATE MOUNT

Floodlighting bracket, aluminum, for mounting on aluminum

poles, plate mount only. Bracket mounts multiple luminaires on

2-3/8-in. OD tenons.

BRACKET SELECTION TABLE

Bracket Size

Number/ Adjacent Tenon

Placement See Ordering Tenon Top OD Weight EPA

Tenons Fig. Number Spacing A (in.) (in.) (lbs) (sq ft)

2 in line 1a FBAPB2TT 33 2-3/8 5 0.6

3 in line 1b FBAPC2TT 33 2-3/8 8 1.1

4 in line 1c FBAPD2TT 33 2-3/8 11 1.6

3 at 120° 1d FBAPE2TT 41 2-3/8 10 0.7

4 at 90° 1e FBAPF2TT 34 2-3/8 13 0.8

Fig. 1

SPORTS LIGHTING CROSSARM BRACKETS

Sports lighting bracket, steel crossarm for mounting 2, 3, or 4

oodlights on wood poles.

BRACKET SELECTION TABLE

Bracket Size

Number of See Pole Ordering Weight EPA

Floodlights Fig. Material Number (lbs) (sq ft)

2 2 wood SBSXBWPP 21 1.4

3 3 wood SBSXCWPP 54 3.9

4 4 wood SBSXDWPP 65 4.8

NOTE: If bracket is to be used for retrofitting an existing steel pole,

substitute S for W in ordering number listed in Selection Table.

Fig. 3

Fig. 4

Fig. 2

NOTE: All brackets are prime painted. For galvanized brackets,

contact factory .

BRACKETS AND MOUNTING ACCESSORIES

BracketsAndMountingAccessories_From_Pages_22-26_012612.indd 1 1/27/2012 2:35:58 PM

Summary of content (5 pages)

PAGE 1
BRACKETS AND MOUNTING ACCESSORIES Fig. 1 FLOODLIGHTING BRACKETS FOR ALUMINUM POLES WITH PLATE MOUNT 1a Floodlighting bracket, aluminum, for mounting on aluminum poles, plate mount only. Bracket mounts multiple luminaires on 2-3/8-in. OD tenons. 1b BRACKET SELECTION TABLE Number/ Placement See Ordering Tenons Fig. Number Adjacent Tenon Bracket Size Tenon Top OD Weight EPA Spacing A (in.) (in.
PAGE 2
BRACKETS AND MOUNTING ACCESSORIES Figure 1 1a FLOODLIGHTING BRACKETS, STEEL BULLHORN Floodlighting bracket steel bullhorn for pole with 2-3/8 in. or 4 in. OD top tenon. Bracket has 2-3/8 in. top OD and is prime painted. BRACKET SELECTION TABLE Recommended Size of Each Luminaire Adjacent Number/ Max Max Tenon Placement See Weight EPA Ordering Spacing Tenons Fig. (lbs) (sq ft) Number A (in.) BRACKETS TO FIT POLES HAVING 2-3/8 IN. OD TOP TENON 2 in line 1a 100 5.0 FBSB2B2TTPP 36 3 in line 1b 100 3.
PAGE 3
BRACKETS AND MOUNTING ACCESSORIES ROADWAY BRACKETS FOR WOOD POLE MOUNTING Roadway bracket aluminum or galvanized steel for mounting on wood poles, pipe sizes from 1-1/4 to 2-in. (32 to 51mm). Cantilever Fig. 1 Single-guy Fig. 2 Tapered Elliptical Fig. 4 Double-guy Fig. 3 BRACKET SELECTION TABLE Thru bolts and lag screws not included Nominal Length (ft) (M) Recommended Size of Each Luminaire 80 MPHI (For high wind velocities, consult factory) Max Weight Max EPA See Ordering Fig.
PAGE 4
BRACKETS AND MOUNTING ACCESSORIES SINGLE AND DOUBLE FLOODLIGHT BRACKETS WOOD POLE MOUNTING Single Floodlight Bracket For Wood Pole Mounting • Most items in stock for immediate shipment • Mounting hardware not included • Finish: Primer • For hot dip galvanized, substitute "G" in place of "P" FIG. 1 FIG. 2 STEEL Ordering Number SF-18P SF-07P Pipe Size 2" 2" A 18" 7" B 23" 20" WT/LBS 15 11 TENON REDUCER BRACKETS FOR POLE TOP MOUNTING (FIG.
PAGE 5
BRACKETS AND MOUNTING ACCESSORIES VERTICAL TENON BRACKET (FIG. 4) FIG. 4 • Mounting hardware not included • Red primer painted Ordering Number A (in.) B (in.) Weight (lbs) VT2-4P 2-3/8 4 5 NOTE: For hot dip galvanized, substitute “G” for “P”. RIGHT ANGLE BRACKET FOR SQUARE STEEL POLE MOUNTING (FIG. 5) • Mounting hardware not included • Red primer painted Ordering Number Pole Size (in.) A (in.) B (in.