Operating instructions

24
press
press
or
then
Buttons to
Press
Scrolling
Display
Description
Range
Enter Calendar
Override
Salt Amount
Capacity K
Grain
Hardness
GPG
2. View Only
press
press
or
then
press
press
or
then
0-99 days
1-140
3. System Capacity in Kilo Grains
Refer to Table 1.
4. Hardness Grains per Gallon
Set based on measured
hardness.
3-200
press
press
or
then
Select
Language
Clock Mode
Units of
Measure
Injector
Selection
Backwash 1
Slow Rinse
Fast Rinse 1
Backwash 2
Fast Rinse 2
Operation
Type
Service
Interval
Chlorine
Generator
LOCKED
LOCKED
LOCKED
press
press
or
then
press
press
or
then
press
press
or
then
press
press
or
then
press
press
or
then
press
press
or
then
press
press
or
then
press
press
or
then
press
press
or
then
5. Display Language
Scroll and select banner
language.
1. Calendar Override*
Set the maximum days between
regenerations.
1-8
12 or 24
0-1
6. Clock
Select 12 hr or 24 hr.
7. Units of Measure
Select English or Metric.
8. View Only
9. First Backwash
DO NOT CHANGE
Use factory settings
Use factory settings
12. Second Backwash
DO NOT CHANGE
10. Slow Rinse
DO NOT CHANGE
11. First Fast Rinse
DO NOT CHANGE
Use factory settings
Use factory settings
13. Second Fast Rinse
DO NOT CHANGE
Use factory settings
14. Valve Type
Displays valve type selected at
start-up. View Only.
15. Time between service reminder
Select number of months
between each service reminder.
1-99 months
14. Chlorine Generator Style
Select On or Off.
0 or 1 or 2
*Setting days between regeneration to zero will cause the system to not regenerate. This setting is used for selecting regeneration on
specific days or to use with a remote regeneration input. Regeneration on specific day is used to provide regeneration when water
demands are not steady. For example, if the weekdays have low usage and the weekend is high, then regeneration every three days
will not meet the requirements.