Data Manual

6
This manual is designed for use in design and selection
of zoned comfort control systems utilizing GE Appliances
Zoneline Packaged Terminal Air Conditioners (PTAC) and
Packaged Terminal Heat Pumps (PTHP). It provides product,
performance and application information to our customers
as well as architects and engineers.
GE Appliances Zoneline PTACs and PTHPs are self-
contained units designed for through-the-wall installations
in hotels, motels, apartments, hospitals, nursing homes,
add-on rooms and many other installations.
Zoneline units provide individual room or zone control in
both cooling and heating operation. There is a model for
practically every application, ranging from 7,000 to 14,900
BTUH in cooling capacity and from 6,200 to 13,500 BTUH
heating capacity in heat pump operation. See pages 43, 44
and 45 for resistance heaters available.
The Zoneline lineup consists of the AZ45 series with
electric resistance heat and the AZ65 series heat pump.
The AZ65 series heat pump features reverse-cycle defrost
and simultaneous supplemental resistance heat, when
needed, to maintain room comfort.
STANDARD FEATURES:
Two independent DC fan motors with indoor cross-flow
blower for quieter operation
Digital Controls
White LED Display
Auto Dimming Display (no control cover)
Easy Temperature Selection
Touch Pad Controls
Universal Heaters
Composite Material Base Pan
“Smart Fan” Fan Cycle/Continuous Control
Supplemental Resistance Heat on Heat Pumps
Reverse Cycle Defrost
Quick Heat Recovery
Quick Connect Remote Thermostat Interface
Electronic Temperature Limiting
Freeze Sentinel
Heat Sentinel
Infinitely Adjustable Vent Door
Indoor Coil Frost Control
Random Restart
Central Desk Control Interface*
Transfer Fan Interface*
* Not available when occupancy sensing thermostat
has been enabled (MODE E). Requires RAKCDC Accessory Kit
OPTIONAL FEATURES:
Corrosion Protection
Makeup Air Module
Dry Air (AZ45 series only)
Internal Condensate Removal (AZ65 series only)
NOTE: Dry Air 25 models include all the standard features
of the AZ45 Series plus standard corrosion protection
ADVANTAGES OF THE ZONELINE SYSTEM:
Flexible Application
May be installed from flush to finished floor,
to 3" from the ceiling
7,000 to 15,000 nominal BTUH units in same
physical size
AZ45 and AZ65 series may be ducted to condition
more than one room
Class 2 remote thermostat control option
Compatible with 2-wire CDC or many Energy
Management Thermostat Systems
Economical Installation
Replacement units fit existing 42"-wide by
16"-high wall sleeves
No ductwork necessary
No mechanical equipment rooms or pipes required
for heating/cooling units
• Quiet Operation
Large indoor cross-flow blower
Sound deadening mastic on SMC bulkhead
DC fan motors with isolation grommets
• Energy-Saving Operation
Units in unoccupied areas may be turned off
Designed for efficient cooling operation
EERs from 10.3 to 13.4
Efficient heat pump units - COPs from 3.2 to 4.0
Reverse Cycle defrost
• Ease of Maintenance
Access with common 5/16" nut driver
Unit design for ease of maintenance
Upfront lift-out interchangeable filters
Slide-out chassis for easy access for cleaning
or if service is required
The AZ65 series heat pumps utilize the unique GE
Appliances heat pump logic and operation to ensure
a comfortable room. The logic used by the units is
the same logic used by central system heat pumps
to provide greater savings.
INTRODUCTION
ARCHITECTS & ENGINEERS DATA MANUAL AZ45/AZ65 SERIES